Film Casting Machine 1600Mm Pe Film Casting Machine 1600Mm Pe Breathable Film Casting Machine For Baby Diaper

Application：
Wide application range: could be applied to the production of PE cast film, breathable film for hot packs and diapers.
type
HLYL1900B-2900B
Machine speed
230m/min
Production speed
Max150m/min-200m/min
Basis weight range
(18-60)±2g/m2
Product structure
Monolayer
Extrusion capacity
Min 500kg/h
Screw diameter
Φ130
Product width
1200mm-2300mm
Winding diameter
max600mm
Corona
online corona treatment(both single-sided and double-sided
Scrap
online recycling
Processing method：
Full Servo Breathable Film Casting Machine Line consists of six units: Extrusion Unit, Casting Unit, Stretching Unit, Embossing Unit, Corona Unit, Winding Unit and Electronic Control Unit. The Embossing Unit can be freely combined according to the customer’s requirements.

Main features：
1. Using independent servo motor for transmission, the Stretching Unit has the feature of stable speed and high-precision function, it can improve product quality effectively.
2. This machine has humanized and intelligent programming, resulting simple and fast operation. The screen could control the temperature of each part of the machine. Besides, the stretching speed is calculated intelligently. With a simple touch on the screen, the production real time data would be achieved efficiently.
3. With stable extrusion on film amount, the weight and thickness of the film could be well controlled.
4. Large speed monitor screen, convenient for operation.
5. The Extrusion Unit adopts hydraulic system for reciprocating motion, therefore it has the feature of stable swing and steady speed, which greatly improves the flatness of the film.
6. With meter-calculator, the alarm alerts while the roll reaches the length pre-set, then overturn and connect material automatically. The function can be completed automatically without staff operation.
7. Safety and humanity: Cast Cooling Unit is provided with safety protection door, and has installed optical fiber detection alarm, it can effectively prevent accidents from mal-operation and protect personal safety of the workers, ensuring the safety of production.
8. Nanjing-Austria technology is introduced to the technological process.
Comparison of the properties for Dot transfer lamination & Suspension scraping lamination
Item
Dot transfer lamination（other used）
Suspension scraping lamination（we used）
Post-maintenance
Frequently changing the width of the rubber baffle will result in a short life of the rubber baffle. The rubber baffle needs to be
replaced frequently. The scraper blade is replaced in about 30 days. The rubber roller is often repaired and replaced, which is
troublesome to disassemble.
Since the width of the glue is changed, there is no need to adjust the rubber baffle, and the rubber baffle has a long life. The
pressure of squeegee for suspension scraping coating is 2-3KG air pressure relative to the squeegee for dot transfer coating, so
the life of the squeegee is relatively long.
Frequently change the width of the glue coating, the baffle is easy to damage
The rubber roller is easy to be deformed and needs maintenance, and the accuracy must be well controlled.
Glue coating material
Not suitable for high air permeability and perforated materials, and not suitable for low weight materials, such as (8-15g
non-woven fabric, etc.)
Breathable and non-breathable materials, both high and low weight materials are available, and mesh materials can also be coated
For More Details, Please Click Here！
Q1: What Industry is your product suitable for?
A1:Our machines are widely used in the fields of disposable hygienic products,disposable medical products, clothing, textile fabrics, self-adhesive labels, medical tape, plaster backing, and various othercoating compounds.


Q2：What if the machine fails during use?
A2:Our machines will be carefully inspected and ensured before delivery,and we will provide the correct instructions for use of the products. In addition, our products support lifetime warranty service, if there any question during using our products please consult our work personnel.


Q3: When can I get the machine after payment?
A3:The product production time about 45-60 days. We will deliver it on time as the date we agreed both side.


Q4: How can I install my machine when it arrives?
A4:We will provide installation videos and tutorials, or send our engineer to your side ASAP
you get all your machines ready, for testing and teaching your technicians how to run the machine.


Q5: What payment do you accept?
A5:We generally accept T/T or L/C, and we can negotiate the payment method.