about Us
Product Description
A600 high-performance vector control inverter adopts advanced current vector control technology. It has full frequency high torque output and fast response, excellent load adaptability, high speed control accuracy and good reliability. It is an ideal choice for high-performance general-purpose inverters that can truly meet the requirements of high field requirements.
Product Features
Superior performance for up to 4 control modes
Maximum operating frequency up to 3000Hz
Automatic slip compensation - more accurate speed
Excellent torque output: 150% rated torque at 3.0Hz (VF control)
180% rated torque at 0.5Hz (current vector control)
High overload capacity - 150% of rated torque can last 60 seconds
Ultra-low noise, carrier frequency can be adjusted between 1-16K (depending on model setting)
Timely and reliable control protection, high system stability
Rich functions
1, can be equipped with LCD panel, double-line digital tube panel, single-line digital tube panel
2, pulse train I/O function
3, running time, electricity consumption record
4, speed and torque control
5, separate VF control
6, swing frequency control
7, fixed length control
8, PID control function
9, communication function
10, the panel has a parameter copy function
Whole machine structure diagram
enter
Rated voltage, frequency
Three-phase (4T series) 380V; 50 / 60HZ Three-phase (2T series) 220V: 50 / 60HZ
Allowable voltage range
Three-phase (4T series) 320V ~ 460V three-phase (2T series) 190V ~ 250V
Output
Voltage
4T series; 0 ~ 380V 2T series; 0 ~ 220V
frequency
Low frequency mode: 0 ~ 300HZ High frequency mode: 0 ~ 3000HZ
Overload capacity
G-type machine: 110% long-term 150% 1 minute 180% 5 seconds
P-type machine: 105% long-term 120% 1 minute 150% 1 second
control method
V / F control, advanced V / F control, V / F separation control, current vector control
Control features
Frequency Set the resolution
Analog input
0.1% of the maximum output frequency
Digital setting
0.01HZ
Frequency accuracy
Analog input
Within 0.2% of the maximum output frequency
Digital input
Set the output frequency within 0.01%
V / F control
V / F curve (voltage frequency characteristics)
Reference frequency 5 ~ 600HZ arbitrarily set, multi-point V / F curve arbitrarily set, but also choose constant torque, low torque reduction 1, low torque reduction 2, square torque and other fixed curve
Torque boost
Manual setting: 0.0 ~ 30.0% of rated output
Automatic boost: According to the output current and motor parameters automatically determine the lifting torque
Automatic current limiting and voltage limiting
The motor stator current and voltage are automatically detected during acceleration, deceleration or steady operation, and are suppressed to within the allowable range according to the unique algorithm to minimize the possibility of system fault tripping
Control features
No sense of vector control
Voltage and frequency characteristics
Output voltage to frequency ratio is automatically adjusted based on motor parameters and unique algorithms
Torque characteristics
Starting torque:
150% of rated torque at 3.0Hz (VF control)
180% of rated torque at 0.5Hz (PG current vector control, flux vector control)
180% of rated torque at 0.05Hz (with PG current vector control)
Running speed steady-state accuracy: ≤ ± 0.2% rated synchronous speed
Speed fluctuation: ≤ ± 0.5% Rated synchronous speed
Torque response: ≤ 50ms PG vector control, PG vector control, flux vector control ≤ 20ms
Motor parameters self-test
Without any restrictions, the parameters of the motor can be automatically detected in the static and dynamic motor, in order to obtain the best control effect
Current and voltage suppression
Full current closed-loop control, completely avoid the current impact, with a perfect over-current over-voltage suppression
Undervoltage suppression during operation
Especially for users with low grid voltage and frequent grid voltage fluctuation, the system can maintain the longest possible running time according to the unique algorithm and residual energy distribution strategy even if the voltage is below the allowable voltage range
Typical function
Multi-speed and swing frequency operation
16 programmable multi-speed control, a variety of operating modes are optional. Swing frequency operation: preset frequency, adjustable center frequency, state memory and recovery after power off
PID control
RS485 communication
Built-in PID controller (presettable frequency) Standard configuration RS485 communication function, a variety of communication protocols optional, with linkage synchronization control function
Frequency setting
Analog input
DC voltage 0 ~ 10V, DC current 0 ~ 20mA (upper and lower limit optional)
Digital input
Operation panel setting, RS485 interface setting, UP / DW terminal control, also can be combined with the analog input multiple settings
output signal
Digital output
2 OC output and one fault relay output (TA, TB, TC), up to 16 meanings
Analog output
2 analog signal output, the output range of 0 ~ 20mA or 0 ~ 10V flexible set to achieve the set frequency, the output frequency and other physical output
Automatic voltage regulation
According to the need to choose dynamic voltage regulator, static voltage regulator, unregulated three ways to get the most stable operating results
Increase, deceleration time setting
0.1S ~ 3600min can be set continuously, S-type, linear model optional
brake
Energy consumption brake
Energy consumption braking starting voltage, hysteresis voltage and energy consumption braking rate continuously adjustable
DC braking
Stop DC braking start frequency: 0.00 ~ [P0.16] upper limit frequency
Braking time: 0.0 ~ 100.0s; Braking current: 0.0% ~ 150.0% of rated current
Flux braking
0 ~ 100 0: invalid
Low noise operation
Carrier frequency 1.0KHZ ~ 16.0KHZ continuously adjustable, to minimize motor noise
Speed tracking speed restart function
It can realize the smooth restarting of the motor during operation and the restarting function of instantaneous stop
counter
One internal counter to facilitate system integration
Run the function
Upper and lower limit frequency setting, frequency jump operation, reverse run limit, slip frequency compensation, RS485 communication, frequency increment, decrement control, fault self-recovery operationMain Products
ApplicationCompany InformationPacking & ShippingFAQQ
How can I get the sample to check your quality?A
After price /confirm/iation, you can require for samples to check our product’s quality. If you just need a blank sample to check the design and quality. We will provide you sample for free as long as you afford the express freight.Q
What can I get the price?A
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us in your email so that we will regard you inquiry priority.Q
What is your term of delivery?A
We accept EXW, FOB Shenzhen or FOB Guangzhou. You can choose the one which is the most convenient or cost effective for you.Q
What about the lead time for the mass production?A
Honestly, it depends on the order quantity and the season you place the order.
