006 digital display SURFACE ROUGHNESS TESTER MODEL SRT-6210

Application:This instrument is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.
Features: Multiple parameter measurement: Ra, Rz, Rq, RtHighly sophisticated inductance sensorFour wave filtering methods: RC, PC-RC, GAUSS and D-PBuilt-in lithium ion rechargeable battery and control circuit with high capacitySmall in size, light in weight and easy to useCan communicate with PC computer for statistics, printing and analyzing by the optional cable and the software for RS232C interface.Manual or automatic shut down. The tester can be switched off by pressing the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last key operation.The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC.Metric /Imperial Conversion Specifications:
Display: 4 digits, 10 mm LCD, with blue backlight
Parameters: Ra, Rz, Rq, Rt
Measuring Range:
Ra, Rq: 0.005-16.00um / 0.020-629.9uinch
Rz, Rt: 0.020-160.0um / 0.078-6299uinch
Accuracy: ≤±10%
Fluctuation of display value: Not more than 6%
Sensor:
Test Principle: Inductance type
Radius of Probe Pin: 5um
Material of Probe Pin: Diamond
Dynamo-measurement of Probe: 4mN (0.4gf)
Probe Angle: 90°
Vertical Radius of Guiding Head: 48mm
Maximum driving stroke: 17.5mm/0.7inch
Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional
evaluation length: 5l
Driving speed:
sampling length = 0.25mmVt=0.135mm/s
sampling length = 0.8mm Vt=0.5mm/s
sampling length = 2.5mm Vt=1mm/s
returning Vt=1mm/s
Profile digital filter
Filtered Profile:RC
Filtered Profile:PC-RC
Filtered Profile:Gauss
Non-Filtered Profile: D-P
Resolution : 0.001μm if reading <10μm
0.01μm if 10μm≤reading<100μm
0.1μm if reading ≥100μm
evaluation length: 5 cut-off
Power Li-ion battery: rechargeable
Operating conditions: Temp. 0~50°C, Humidity <80%
Size: 140 x 57 x 48 mm (5.5 x 2.2 x 1.9 inch)
Weight: about 420g
Standard accessory:
Standard Sensor RP-100
Groove Stylus SRP-110
Curvature Probe SRP-120
Extension RodSER-150
Measurement StandSRS-1
Standard Sample Plate SSP-180
Cable and Software for RS-232/USB