Precision flow control medical i.v. infusion set

Precision flow control medical i.v. infusion set 2closure-piercing device8 tubing
3air inlet with air filter and closure 9 flow regulators
4fluid channel 10 injection site
5drip tube 11 male conical fitting
6drip chamber 12 protective cap of male conical fitting a Closure of the air inlet is optional.
bThe fluid filter may be positioned at other sites, preferably near the patient access. Generally, the fluid filter used has a nominal pore size of 15 µm.
c The injection site is optional.
Item name
Precision flow control medical i.v. infusion set
Material
Medical grade PVC/PP/PE/ABS, rubber, stainless steel
Color
Transparent
Type
IV-6-1 with air vent drip chamber, flow regulator
Style
Soft tube with air vent and Luer slip/ Luer lock, or Y-type
Advantage
Suitable to hard containers ,Sterile, non-toxic, pyrogen free
Certificate
CE, ISO
Sterilization
EO gas or gamma radiation
Loading port
Shanghai or wuhan
Terms of payment
30% deposit before production and 70% balance payment before deliver or L/C at sight
Delivery time
Within 30days after receipt of deposit or LC at sight
protective cap
PP or PE
fluid filter
PVC
closure-piercing device
ABS
tubing
PVC
air inlet
PE
flow regulators
ABS or PP
fluid channel
PVC
injection site
Rubber
drip tube
PVC
male conical fitting
PE
drip chamber
PVC
intravenous needle
Stainless steel
-Close the roller clamp.
-Punch the lancet into the container.
-Open the roller clamp and expel the air bubbles.
-Close the roller clamp.
-Guide the needle into the vein.
-Adjust the flowing rate.
-Infusion set with air-inlet device in use with the rigid container.
- Read ‘direction of use’ carefully before use.
- Do not touch the needle
- This set is only for single use.
- Do not store under direct sunlight or extreme temperatures.
- Keep dry
- Do not use if package is damaged or open
- Do not use after expiry date
- Discard after use.
- Never use if any part of the set is disconnected, or if protective cap is detached or loose

-This product is strictly prohibited during transport wrestling touch, rain, stress.
- The product should be stored in less than 80% relative humidity, temperature -10 °C ~ 40 °C, non-corrosive gases and well-ventilated room.
-Laying layers not more than seven layers.