CONTEC OC5B Factory Wholesale cheap portable medical Oxygen Concentrator

Product Description
Introduction
OC5B Oxygen Concentrator consisted of air compressor, adsorption tower of molecular sieve, sensor and flow meter uses the molecular sieve as the absorbent, adopts pressure swing absorbers (PSA) to directly concentrate the medical oxygen with high concentration from the air. And it is a small and portable oxygen concentrator. The machine takes the advantages of small in volume, light in weight, convenient in moving (as it has turning truckle), stable in performance, high in safety, easy in operating, low in noise, safe in working, which complies with requirements of medical device and national standard. By connecting with external accessories, the machine can realizes the measurement and display of SpO2 and pulse rate and medication atomization. The machine has a wide application range, including family, clinic, hospital, oxygen bar, plateau outpost, gym center, etc.Function
With turning truckle, easy to move
2.7" LCD screen
Built-in filter to sieve the impurity
Oxygen concentration status indicator
Function of accumulating time
Function of timing shutdown
Alarm for power failure
Alarm for high/low pressure protection
Alarm for low flowrate
Measure SpO2 and pulse rate
With working indicatorPerformance
Maximum recommended flowrate: 5L/min
Oxygen Output Concentration Levels: (reach the stated oxygen concentration level within 30 minutes after turning on the machine): it's 93%±3% when the flowrate is 0.5~5L/min
Flowrate range: 0.5~5L/min
Flowrate change in maximum recommended flowrate when back pressure of 7 kPa is applied: <0.5L/min.
Outlet pressure: 20kPa~50kPa
Input Power Consumption: 400VA
Electrical Requirements: AC220V±10%, 50Hz±1Hz
Operating noise: ≤55dB(A)
SpO2 Measurement
1)Range: 0%~100%
2)Resolution: 1%
3)Accuracy: When SpO2 is in range of 70%~100%, the error is ±2%; less than 70%, unspecified.
Pulse rate Measurement
1)Range: 30bpm~250bpm
2)Resolution: 1bpm
3)Accuracy: ±2bpm or ±2%, whichever is greater
Safety characteristics:
1) Type of protection against electroshock: class Ⅱ equipment
2) Degree of protection against electroshock: Type BF applied part
3) Degree of protection against ingress of water: IP21Accessories
Humidifier bottle
User manual
Power cord
Nasal oxygen cannula
SpO2 probe
Atomization accessoryPhysical characteristicOperating Environment:
a) Temperature: 10℃~40℃
b) Relative humidity: ≤80%
c) Atmospheric pressure: 860hPa~1060hPa
d) Power supply: AC 220V, 50Hz
f) Altitude: normal use from sea level to 1900m, less than 90% efficiency from 1900m to 4000m
Company Information
BrandCONTEC