Pwm Dimming Led Driver Pwm Led Driver Dimming Led Driver

45W PWM Output LED Driver IDLV-45 Series
Features
Constant Voltage PWM style output with frequency 1KHz
Plastic housing with class II design
Built-in active PFC function
No load power consumption<0.5W(Blank-Type)
Function options: 2 in 1 dimming (dim-to-off);

Auxiliary DC output
3 years warranty
Meanwell IDLV-45-24 45w pwm dimming led driver
Description
IDLV-45 series is a 45W AC/DC LED driver featuring the constant voltage mode PWM style output design. IDLV-45 operates from 90 ~ 295VAC and offers models with different rated voltage ranging between 12V and 60V. Thanks to the efficiency up to 90%, with the fanless design, the entire series is able to operate for -20°C ~ +85°C case temperature under free convection. IDLV-45 is equipped with various function options, such asdimming methodologies, so as to provide the design flexibility for LED lighting system.

Applications
LED strip lighting
Indoor LED lighting
LED decorative lighting
LED architecture lighting
SPECIFICATION
MODEL
IDLV-45-24
OUTPUT
DC VOLTAGE

24V
ConSTANT CURRENT REGION
1.88A
RATED POWER
45.12W

DIMMING RANGE
0 ~ 100%
VOLTAGE TOLERANCE
±10%
PWM FREQUENCY (Typ.)
1KHz (±20%)
SETUP, RISE TIME Note.3

500ms / 230VAC 1200ms / 115VAC
AUXILIARY DC OUTPUT Note.4
Nominal 12V(deviation 11.4 ~ 12.6) at 50mA for A-Type only
INPUT
VOLTAGE RANGE Note.2
90 ~ 295VAC 127 ~ 417VDC (Please refer to "STATIC CHARACTERISTIC" section)

FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC at full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMonIC DISTORTION
THD<20% (at load≥60%/115VAC, 230VAC;at load≥75%/ 277VAC (Please refer to "TOTAL HARMonIC DISTORTION (THD)" section)
EFFICIENCY (Typ.)
86%
AC CURRENT (Typ.)
0.6A / 115VAC 0.4A / 230VAC 0.3A / 277VAC
INRUSH CURRENT(Typ.)
COLD START 30A(twidth=150μs measured at 50% Ipeak ) at 230VAC; Per NEMA 410

MAX. No. of PSUs on 16A CIRCUIT BREAKER

32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 277VAC
NO LOAD POWER CONSUMPTION
<0.5W for Blank-Type, <1.2W for A-Type
PROTECTION
SHORT CIRCUIT
Shut down O/P voltage, re-power on to recovery
OVER CURRENT
105 ~ 115%Protection type : Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT
WORKING TEMP.
Tcase= -20 ~ +85°C (Please refer to "OUTPUT LOAD vs TEMPERATURE" section)
MAX. CASE TEMP.
Tcase= +85°C
WORKING HUMIDITY
20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +80°C, 10 ~ 95% RH

TEMP. COEFFICIENT
±0.03%/°C (0 ~ 40°C)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
SAFETY STANDARDS

UL8750, CSA C22.2 NO.250.13-12; EN/AS/NZS 61347-1 & EN/AS/NZS 61347-2-13 independent, EN62384, GB19510.1, GB19510.14, BIS IS 15885(for IDLV-45-12, 24, 48 only), EAC TP TC 004 approved

WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC

ISOLATION RESISTANCE
I/P-O/P:100M Ohms / 500VDC / 25°C/ 70% RH
EMC EMISSION

Compliance to EN55015, EN61000-3-2 Class C (at load≥60%); EN61000-3-3, GB17743, GB17625.1, EAC TP TC 020

EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity: Line-Line: 1KV), EAC TP TC 020
OTHERS
MTBF
386.59K hrs min. MIL-HDBK-217F (25°C)
DIMENSION
120*75*25mm (L*W*H)
PACKING
0.22Kg; 54pcs/13Kg/0.93CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25°C of ambient temperature.
2. De-rating may be needed under low input voltages. Please refer to "STATIC CHARACTERISTIC" section for details.
3. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time.

4. Aux. 12V will be damaged with short circuit; It will not be available with dimming off or output no load condition.
5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft).