TLP281 4 CH 4 Channel Opto-isolator IC Module For Arduinos Expansion Board High And Low Level Optocoupler Isolation

We are professional manufacturer and exporter that is mainly engaged in research and development, production and sales of Arduinos, 3D Printers, Raspberry Pi and STM32 and other open source. We strive to ensure that all of our customers are completely satisfied, and it is our hope that you truly are.TLP281 4 CH 4 Channel Opto-isolator IC Module For Arduinos Expansion Board High And Low Level Optocoupler Isolation
This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. This board electrically isolates a controller from the high-power system by use of an opto-isolator IC.
This IC has four LEDs and four photodiodes built-in.
This allows the low-voltage side to control a high voltage side
We often use this board to allow a microcontroller control servos
or other motors that use a higher voltage than the TTL logic on the (3.3V or 5V) micro,
and may cause electromagnetic interferance with our system as the motors turn on and off.
This board will isolate the systems, creating a type of electrical noise barrier between devices
This breakout board uses the TLP281 optoisolator and discrete transistors to correct the logic.
Comes with four channels.
Great for use in noisy circuits where signal lines require electrical isolation
A normal LED opto-isolator will invert the logic of a signal.
We threw some transistors on this compact board to correct the inversion.
What you put into the IN pins, will be replicated on the the OUT pins, but at the higher voltage (HV)
Features:
Use of low level control high level.
Such as the use of single chip microcomputer 3V or 5V voltage 9V or 12V voltage control
HVCC maximum not more than 24V.
Outlet OUT1 / OUT2 / OUT3 / OUT4 output current is equal to the largest HVCC / 5.1K,
maximum absorption current 500mA
Input: IN1 / IN2 / IN3 / IN4, SCM or for Arduino IO port,
GND with single-chip microcomputer or for Arduino board GND connection.
IN1 / IN2 / IN3 / IN4 respectively control the OUT1 / OUT2 / OUT3 / OUT4
Output: OUT1 / OUT2 / OUT3 / OUT4
Output: HVCC: Connection is control of high voltage anode,
HGND connection is control of high voltage anode
PCB Size: 25*24mm/0.98*0.94
Our Services
Our Services
1. Supply all kinds of electronic components, Raspberry Pi,Arduino-Modules and Sensor.
2. Sample order within 24hours delivery.
3. We will reply you for your inquiry in 2 hours during the working time.
4. After sending, we will track the products for you once every two days, until you get the products.
5. If you have any questions after sales, contact with us, we will offer the solve way for you.
Our Advantage
1) More than 10 years business enable us accumulated much experience in electronic components filed;
2) We are ability to control and detect the quality,could make sure the quality for you;
3) Lots of parts in our own store and stock,Fast shipment is supported;
4) Service for customer will be improved in our daily work;
5) Submit all real news about electronic parts is our behavior criterion;
6) Be your reliable supplier in shenzhen of China is our pursue.
Payment & Shipping
Order process
1. Confirm the order and contact us
2. Payment through TT/Alibaba insurance order.
3. Ship out the parcel after payment.
4. Parcel arrive in local custom , pls kindly arrange the custom clearance.
This is very important ,if you can not make this ,pls consult your local custom before confirm the order.
5. After custom clearance ,then DHL or fedex or ect will send the parcel to your address .Door to door service.
Note
1. Before you confirm the order , you must consult the local custom about how to make the custom clearance .If you can not make this ,you can not get the parcel and it will be destroyed in custom .
2. India customer must offer PAN CARD ,AADHAAR CARD and email ,or POA and KYC file for custom clearance .This is necessary for you in india custom.
3. Drone products are sensitive products ,different country have different requirements .If you are new in this field ,pls kindly consult local custom and confirm you can make the custom clearance.
Company Information
FAQ
Q1. How can we know the product quality?
A1: We suggest you to order a sample. Also, you can send us email for detail photos for checking if you cannot get enough information in the product page.
Q2. Is it the final price in the price list?
A2:No, there still have some negotiated room. It is depends on the order you placed, the more you placed, the lower price you will get.
Q3.Can you offer OEM/ODM service?
A3:YES. The OEM/ODM is welcomed, we can printing any logo on the sample as your require.
Q4. How can I send inquiry?
A4:When you find something you are interested, you can leave your information to us.
Q5.What is your payment?
A5:We usually accept payment based on L / C, T / T, Western Union and PayPal.
We look forward to working with you for a long time. If you have any questions, please feel free to contact us. You can rest assured that we will promptly and carefully handle your order. GO HOMEGO HOME