Thermal Ctp Plate Developer

Thermal Ctp plate developer & replenisher
For developing Conqueror®, Ipagsa®, Kodak®, Konica®, and Southern thermal laser and positive plate systems.
For use in any positive plate or positive thermal plate processor.
Finish with PreBake if baking. Finish with Subtractive Finisher if not baking.
Package: 20L Read-to-use
Plate Type: IR-sensitive, Positive, Thermal CTP Plate
Developer: Culmination DV-6
* Ready-to-Use 20Lt. Bottle
Developer bath life:10days or 2,000m2
Image reproduction: Good
Laser characteristics:Thermal830nm
Replenisher: Culmination DVR-6
* 20 Liter Ready-to-Use
Replenishment rate: From 110ml/m2-130ml/m2 whilst processing, 60-65ml/hour whilst standing. 40-45ml/hour when machine stop work.
Resolution: 250lpi (1-99%)
Run length (baked): 1,000,000
Run length (unbaked): 150,000
Safelight environment: yellow light 10 min.;
Sensitivity:130-175mJ/cm2
Exposure density: (ptr8000) 75%, speed 750r/min
Storage: 12 months @ 25 degrees Celsius
Working conditions 21oC to 25oC; temperature change +/-1oC within the mentioned range. Humidity 50% - 60% (non condensing), change<5% per hour
UV-ink characteristics (baked): Good
UV-ink characteristics (unbaked):100,000
Process: (Grafmac W-PTP32CDN Processor)
Room temperature: 28 C
Developer PHscale : 12.0-13.0
Developer Electrical conductivity: 84-90us/cm
Develop time: 25 +/_ 3 s
Develop temperature: 25°C
Use original liquid both, no water adding.
1st developer only pour to tank of processor, replenisher will be adding automatically through the pipe , when the developer concentration is getting weak.
Bake temperature: ………………320°C
Bake time: 5 min. or moreRoom Temperature28CDevelop Ph Scale 12.0-13.0Develop Electrical Conductivity84-90us/cmDevelop Time 25 +/_ 3 s