Scrap Metal Baler Baler For Scrap Mental Used Scrap Metal Balers

hydraulic recycling horizontal scrap metal baler, steel material/scrap steel metal press machine
Specifications :
1.Hydraulic scrap metal baler
2.Hydraulic drive ,manual valve operation or PLC control
3.Bale-discharging :turn-out ,push-out, forward-out
4.Waste metal baler machine
5.metal press baler machine

Descriptions :
Y81 series Hydraulic scrap metal baler press the leftover of all kinds of metal material, including steel shavings, scrap tel, scrap aluminum,scrap copper,scrap stainless steel to be qualified in the shape of cuboid,octagon,cylinder and so on, which increases the speed of casting. The purpose is reduce the costs of transportation and smelting.
This hydraulic scrap metal baler machine is mainly applicable to steel mills,recycling industries and ferrous metallurgical works.
Compression box size,bale size,bale shape can be customized according to clients requirement.
Features :
1.All hydraulic scrap metal baler machines are hydraulic-driven with alternatives of manual or automatic control .
2.Bale-discharging alternative : turn-out , push-out , forward or manual discharging .
3.No fang bolts needed for installation ; diesel engine can be used as power when electric power is unavailable .
4.There are ten grades of baling force from 63 to 630 tons .
The size of hydraulic scrap metal baler can be custom made as per customers .

Production brief introduction :
This hydraulic scrap metal baler machine can cold compresses waste automatic shells ,waste buckets,waste copper and aluminum into rectangle lumps . The package is discharged from the front and secondary compression is applied.
The operation efficiency is high and lump lengths are identical and uniform .The hydraulic system applies an integrate
valve block and the product is stable and reliable in technical performance .
Photo of hydraulic scrap metal baler:
part names of hydraulic scrap metal baler:
clearly photo of our hydraulic scrap metal baler:
Working principle of hydraulic scrap metal baler:
The packing material is placed in the packing box, and the hydraulic cylinder is pressed. The packaging material is compressed and molded into various metal blocks.
Product advantages of hydraulic scrap metal baler:
The hydraulic scrap metal balermachine is easy to use, easy to move, simple to operate, easy to maintain, reliable and reliable. It is a good equipment to improve the efficiency of labor, reduce labor intensity, save manpower and reduce the cost of transportation.
The technicalparameters of hydraulic scrap metal baler :

TYPE

Norminal
Force(KN)
Compression
(L*W*H)
(mm)

Baiesize(W*H)
(MM)

Bale
Density

Capacity
(kg/m2)

Single
cycle
time
(sec)

Power
(kw)

Bale
Discharging
/Operation
Y81-63
630
1000*600*500
(180~250)*190*190
≥1800
500-1000
90
7.5

Tum-out
Y81-100
1000
1000*600*500
(200~300)*200*200or
(Octagon)
≥1800
1000-1200
120
11
Tum-out
Y81-125
1250
1200*700*600
1150*700*600
(150~400)*240*240or
(Octagon)
≥1800
1000-1500
120
11or15
Tum-out
Y81-160
1600
1600*1000*800
(400~600)*350*350
(400~600)*400*400
≥1800
2000-3000
150
22
Tum-out
Y81-200
2000
1600*1000*800
(400~700)*400*400
≥1800
2500~4500
160
30 or 37
Turn-out
Y81-250
2500
2000*1400*1200
(400~700)*450*450
≥1800
3500~5000
160
40 or 60
Turn-out
Y81-315
3150
2000*1400*1200
(400~700)*450*450
≥1800
3500~5000
160
60
Turn-out
Y81-400
4000
2000*1600*1200
(400~700)*500*600
≥1800
5000~6500
160
66 or 110Turn-out
250T Hydraulic scrap metal baler:
| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler |
Detail parts of hydraulic scrap metal baler:
| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler |
our material for hydraulic scrap metal baler is new metal plate, not scrap steel
| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler |
Producing hydraulic scrap metal baler:
| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler |
Inside of our hydraulic scrap metal balercompression chamber, a layer of wear-resistant steel plate
| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal b
aler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler |
Transporting of ourhydraulic scrap metal baler :
Safety operation regulation ofour hydraulic scrap metal baler machine:
1. before the operation should wear tight protective clothing, the cuff fastened, the upper garment can not be open, must not be worn around the machine tool, change clothes, or peri cloth on the body, to prevent the machine from wound. Safety helmet must be worn, and the plait should be put in the hat, and no skirt or slippers should be worn.
2. before the packing machine work, first start the equipment for 3 minutes, at the same time check whether the oil tank is sufficient, the oil pump sound is normal, the hydraulic unit and the pipe, joint and piston have leakage;
3. when the cover is lifted, the handle is pulled back to the return position, and then the handle is pushed. Every time the bag is turned around, it should be cleaned up in time to prevent death.
4. when packing, operators must pay attention to safety, laying aluminum evenly and laying aluminum in place. The upper box door should be closed before packaging can be started.
5. when packing, the hydraulic operation handle should be pushed to the specified position quickly, so as to prevent the valve blockage and the insufficient hydraulic oil flow, resulting in motor overcurrent. When each operation is in place, the handle of the valve needs to be restored to the middle position.
6. shut down the door cover when shutting down, then stop the motor and cut off the power.
7. after packing, all hydraulic rods must be retracted into the hydraulic cylinder to prevent dust from damaging the sealing ring and leaking oil.
8. regular maintenance work, found that there is oil leakage in the oil pipe area immediately looking for machine repair;
9. if an abnormality is detected, the operation should be stopped immediately.
10. After opening the box door, gate operation is strictly prohibited to prevent accidents.
11. the oil in the tank must be filtered strictly and always keep enough oil. Oil tank should be cleaned and replaced once every half year.
12. the lubricating parts of the equipment should be lubricated at least once a class according to the requirements.
13. when many people operate at the same time, division of labor should be made clear so as to avoid misoperation. Those who do not know the structure, performance and operation rules of the main machine must not operate the machine without permission.
14. when the machine has serious oil leakage or abnormal phenomena in the work, it should stop immediately. Eyes should not be seen in the area where the oil is injected. They can not be directly blocked by hand.
15. when the machine is running or packing, it is not allowed to repair or touch the moving parts.
16. when the pump, valve and pressure gauge are adjusted, it is necessary for experienced technicians to carry out the adjustment. If the pressure gauge is found to be faulty, it should be repaired or replaced immediately.
Certificate of our hydraulic scrap metal baler:
| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler |
Client visiting our hydraulic scrap metal baler:
| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler |
| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler |
| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler |
| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler |
Thanks for visiting our hydraulic scrap metal baler!
| scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler| scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler |scrap metal baler | scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler |
| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler| scrap metal baler | scrap metal baler | scrap metal baler | scrap metal baler |