Light Steel Frame House Prefabricated Steel Frame House Light Gauge Steel Frame Houses

ProductSpecificationNo.ItemMaterialSpecification1FoundationFixing to foundationChemical bolt2StructureSteel frame wall0.75/0.95/1.15mm steel wallRoof truss0.75/0.95/1.15mm steel trussJoist (chassis)0.75/0.95/1.15mm steel joist3Roofing systemBatten35mm battenVapor barrierNormal vapor barrierTileOptionalInsulationGlasswool4Ceiling systemBatten22mm battenCeilingGypsum/MGO board, etc.InsulationGlasswool5Exterior wallExt. wall claddingOptionalVapor barrierNormal vapor barrierInsulationGlasswool6Interior wallLiningOptionalInsulationGlasswool7Floor systemUnderneath of floorCFC/ALC board, etc.FlooringOptionalInsulationGlasswool8Kitchen(if in plan)Kitchen cabinetOptionalCounter topOptionalSinkOptional9Bathroom(if in plan)ToiletOptionalWashbasinOptionalShowerOptional10Doors and windowsExterior doorOptionalInterior doorOptionalWindowOptional
Light Gauge Steel Structure
1) Lifetime for structure: 100 years.
2) Earthquake resistance: mix more than 8 grades.
3) Wind resistance: max 60m/s.
4) Fire resistance: all the materials used can be fire resistance.
5) Snow resistance: max 2.9KN/m²as required
6) Heat insulation: 100 mm in thickness can match 1 m thickness of brick wall.
7) High acoustic insulation: 60db of exterior wall 40db of interior wall
8) Insect prevention: free from the damages by insects, such as white ants
9) Ventilation: a combination of natural ventilation or air supply keep the indoor air fresh and clean
10) Packing and delivery: 140SQM/ 40'HQ container for structure only and 90SQM/ 40'HQ container for structure with decorate materials.
11) Installation: the average is one worker one day install one SQM.
12) Installation guide: dispatch engineer to guide on site.Design code
1) AISI S100 North American Specification for the Design of Cold Formed Steel Structural Members published by the American Iron and Steel Institute (AISI) in the United States.
2) AS/NZS 4600 Australian/New Zealand Standard-Cold-formed steel structures jointly published by Standards Australia and Standards New Zealand.
3) BS 5950-5 Structural use of steelwork in building-Part 5. Code of practice for design of cold formed thin gauge sections published by BSI in the UK.
4) ENV1993-1-3 means Euro code 3: Design of steel structures; Part 1.3: General rules, Supplementary rules for cold-formed thin gauge members.Product ReferenceOur CompanyOur service