Fog Free dental orthodontic mirrors with LED Light

Fog Free dental orthodontic mirrors with LED Light
Specification: Introduction :
The Fog Free Photo generates the light and breeze, this can cause the reflector defogging, and assist the dentist taking photos in the mouth.
2 Technical Specifications
Battery:1000mAh / 3.7V
Input:5.0V 1.0A
Output:1.3W Max
3 Charging
3.1 When the light flashes, lightness is not enough or fan shutdown automatic, please stop using the device and recharge
the battery.
3.2 Connect the AC adapter with the bottom socket of the device properly, and insert the AC USB adapter plug to the
power socket.
3.3 The green indicator is lighted when the device is charging, it means charging has finished when the green indictor
turns down.
4 Operation
4.1 Fan button, Turn ON/OFF the fan.
4.2 Fan and the light button, Turn ON/OFF the fan and light simultaneous.
4.3 Insert the mirror to the back socket of the main unit, push the fan button and breeze
the mirror, the mirror defogging, if the lightness is not enough, then push the fan and light button.
4.4 The device will shutdown automatically after 3 minutes without operation.
4.5 Pull the mirror out the main unit, disinfect and clean the device according to the user manual.
5 Disinfection, cleaning and sterilization
5.1 The main unit and the mirror must be cleaned, disinfected and sterilized before each use to prevent any contamination.
This concerns the first use as well as the subsequent uses.
5.2 After each use, all the objects that were in contact with infectious agents should be cleaned using towels impregnated
with a disinfecting and detergent solution (a bactericidal, fungicidal and aldehyde free solution). Use of chemical agents
may cause damage to the equipment.
5.3 The mirror must be sterilized between treatments by autoclave at 134°C.
5.4 The main unit can not be autoclaved.
Contact
Cathy Chen
Company
NOVO EXPORT LIMITED
WhatsApp
Wechat
Viber
+8618926466077