Large Plastic Kayak Professional Kayak Plastic Kayak Mold

OEM design vacuum forming large plastic kayakProduct Description
1.OEM design vacuum forming large plastic kayak
2.The max size:4000*2000*1000mm.
Common Materials for Vacuum Forming plastic kayak
Depending on your application there’s a range of polymer sheets available on the market. However, if you’re looking for short runs, one of your biggest issues will be colour matching.
Unlike Plastic Injection Moulding, which is an additive production system, Vacuum Forming is subtractive. Often basic colours are available freely, but anything beyond that will be difficult to source unless you’re looking for one ton loads or above.
When choosing a plastic, you’ll need to consider application. Will your product be used inside our out? Will it be exposed to extreme heat or cold? Does the product need to withstand high impact? Are you looking for something that’s fire retardant?
As a general rule of thumb, we work to the following guidelines.
PVC – Fire retardant, Good for outdoors use, Often used for non food based packaging and toy manufacture.
PE – High wear resistance and impact strength, High temperature resistance, High energy absorption, Self lubricating.
PP – Hygienic, impact resistant, ideal for food applications.
ABS - High rigidity and impact strength, Excellent chemical and abrasion resistance, Easily machined to close tolerances. Used for interior and exterior trims, machine parts, trays and home appliances.
HIPS – Often used for food, dairy and medical packaging applications where taste/odour sensitivity is key.
PC-polycarbonate,it is a most strong material, with high strength and elastic modulus, high impact strength, wide range ofusage temperature.Company Information
Our factory is professional in plastic vacuum thermoforming more than 10 years of experiences. offering many different kinds of plastic vacuum thermoforming products.Could make the products according to customers’ design drawing .
we have the biggest vacuum forming machine in guangdong,it can reach 4000*2000*1000mm.
Address : 6th Floor, Bldg. N, Jinxiongda Industrial Park, Xingyuan Road, Datanglang Village, Dalingshan Town,Dongguan,Guangdong,China(mainland)
Tel :+86 769-82868066
Fax:+86 769-82868099
Mobile :+86 13825780422 (Amy)
Skype:chaomei911
Website :www.dgdtxs.com.cn
some picture for your referenceOur ServicesOur standard manufacturing steps for our products : 1)Customers provide 3D design drawing or sufficient info ( leng x widht x highx thickness, material, colors etc)2)We offer quotation in time3)once confirmed price,we arrange to build mold according to customer's design drawing4)Make samples for customer approved5)Arrange mass production after sample approved by customers6)Timely complete production for on-time deliveryFAQ
1.what is vacuum forming or thermoforming ?
Vacuum formingis a simplified version ofthermoforming, whereby a sheet ofplasticis heated to a forming temperature, stretched onto a convex, or into a concave, single-surfacemold, and forced against the mold by avacuum(suction of air).
2.How is the vacuum forming or thermoforming to process?
1>.The process begins by fixing a sheet of plastic of uniform thickness onto a sturdy frame. This frame is inside the vacuumchamber. Then the frame is heated and slowly lowered over the buck, until the frame touches the bottom of the chamber and the soft plastic is draped over it.
2>.Next, air is pumped out of the chamber, adhering the plastic to the buck in a precise mold. If the mold contains too deep a hole, "blowouts" may occur, in which the plastic rips and the process must be restarted. Because of blowouts, there are limitations on the shape of the mold. The vacuum in the box can be created by something as off-the-shelf as a vacuum cleaner. A high-intensity vacuum is rarely necessary.
3>.After the mold is completed, the plastic must be allowed to cool. When the plastic is cooled, it is removed vertically from the sample. Vacuum forming does not create a form that encircles the entire mold, but only one side, because the sample must lie on the bottom of the vacuum chamber unless a special stand is used. When the plastic is difficult to remove from the mold, a knife must be used to score the perimeter first.
3.what we need to open mould and quote ?
If you can give us IGS files, it is better for our engineer.
Walcome to order and visit our factory