Bicycle Braking System Durability Testing Machine

Bicycle Braking System Durability Testing Machine
Product Description
This tester is suitable to test bike’s run test& brakes performance test. The tester is formed by two rollers with varied diameter and follows specification to install jump plates at bike’s seat post. pedals, bars, luggage carries, with load set to this tester. Adjust the distance between front and rear wheel base on the standard for complete cycles, constantly rotate the wheel is by 7-27km/hr and the bike is supposed to maintain its normal function, no part damage or crack is found. For brake test, follow the specification specified roller’s friction coefficient, wind speed and water-spray amount of loaded brake & handlebars to test the performance
Designed standard:
EN14764, EN14765 (City and trekking bicycle Part 4, Bicycle for young children Part 4)
Main technical:
Model
TT-1052DB
TT-1052B
TT-1052D
Brake & run test
Brake test
Run test
Adjust range between front & rear wheels
mm
860~1200/(600~1200 optional) / Customer specified
Counter setting
diameter
760/(560 optional ) / Customer Specified
Jump block amount& combination phase
EN14764 standard
EN14764 standard
power
Servo Motor + reducer + Clutch
AC Reduce Motor+ speed Regulation+ clutch
Testing speed(km/hr)
7-26km/hr(special speed-upon request)
Crank Drive Mechanism(optional)
Testing speed(km/hr)
7-26km/hr(special speed-upon request)
Counter Weight
Seat Post(Kg)
36
Overall Weight 120
Pedals(Kg)
18
Handlebar(Kg)
6.75
Luggage Carriers(Kg)
10.18.25.according to luggage carriers, area 204X240(Assembly Type)
Head Tube(Kg)
14
Force to Brake Handlebars
ConformEN14764 Standard(Auto weight 40~180N)
Brake Force
Brake Force(N)
700
±1
N/A
Resolution
N/A
Accuracy
N/A
Power
3;220V;50HZ(3;380V optional)
Consumption
KW
10
5
8
Dimension(WxDxH)
3030x1200x2900mm (Ref Only)
Standard Accessories
Tool Kitx1, Operational Manual in English x1, Testing dead weigh, Warranty Certificationx1
Company Information
Quality Control
Packaging & Shipping
Packaging & Shipping
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case.
Our Services
Haida Equipment Service:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-con.
onsite Service:
1.Device installation; 2.Equipment Operation Test Technology training;3.Equipment Calibration;4.Daily maintenance and maintenance of equipment
Free technical training for visiting factories
24-hour online contact
Free software upgrades
Free information:
1.Product Instruction;2.Product operation instruction/video;3.Experiment Test (test application, test report)
Device Problem Handling:
1. Social media 24 hours online communication;2. Mail Seamless Docking;3. Video Conferencing;4. Artificial free door-to-door service