2019 Hot Sales Yellow Resistant Crystal Clear Epoxy 3D Flooring Glue

Application
Specially designed for 3D floor, large size wood table casting, lamp potting and mold filling,etc..
Feature
1.can be cured under normal temperature and high temperature
2.Good flowing property, low viscosity
3.Very little heat release, natural defoaming
4.Anti-yellow, high transparency
5.No ripple, bright in surface Technical Data
Item
A
B
Color
Transparent
Transparent
Specific gravity
1.15
0.96
Viscosity (25℃)
1500-4000CPS
100 MAXCPS
Mixing ratio
A: B = 100:33(weight ratio)
Hardening conditions
25 ℃x12H to 16H or 55℃x2H (2 g)
Usable time
25℃x50min (100g) Coverage Data
The coverage data is as below ,it is for your reference, the real data depends on your own requirements.
--1st time to coat on the concrete floor to make the floor smooth at the same level ,with the thickness of 1mm,1m2=0.15KGS
---3D Stickers, the max width is 3m,the length is limitless ,we can print the images or pictures as your supply to us
---2nd time to coat on the 3D stickers to ensure the stickers fix completely on the concrete to avoid peeling off after a period of time,with the thickness of 1mm,1m2=0.75KGS
---with the thickness of 1mm,1m2=0.15KGS Notes: You can adjust the thickness to your own requirements.
Item
Thickness
Coverage Data
Remark
A
2mm
0.9kgs/m2
Coat twice
3D Image
/
1m2
With max width os 3m
B
1mm
0.15kgs/m2
Coat 1 time


Warm prompt
One:what reason is glue occurrence does not stick and do not cure?
Answer:this type of glue must be in accordance with its ratio, and it is the electronic weight ratio, not the volume ratio. Also, look at the temperature. If it's too cold, it's recommended to heat it up to 25 degrees before stirrig.
Second: we do not have vacuum equipment, how to defoaming?
Answer: dear, there is no vacuuming equipment no matter, our glue is natural defoaming, glue thoroughly after mixing, stationary 5-20 minutes, can automatically defoaming.
Three: why is our glue seven days old and still not solidified?
Answer: if the product is hard glue for 3 days and soft glue for 7 days and still does not cure, 1. Please check whether the ratio is based on weight; 2. 2. Whether the stirring method is correct or not. Considering environmental protection and safety, the curing agent is water-based, which is as thin as water. 3. If you can confirm that there is no problem with 1 and 2, then this is very important. The proportion of A component +B component of the primary glue should be more than 50 grams, and the proportion must be weighed by electrons.
Four: glue mix mix which component first pour?
Answer: when mixing this product, please pour glue B into the blender, and then pour glue A.
Five: I still don't understand what to do?
Answer: then please contact our customer service, we are ready to serve you 24 hours a day.