Polyester Release Pes Hot Melt Adhesive Film For PVC

Polyester Release Pes Hot Melt Adhesive Film For PVCProduct Description
Product: DS001TS
Description:This product is a thermoplastic adhesive, suitable for a variety of uses on a wide range of materials. It performs an excellent adhesion for textile, polyester, cotton, blended fabric, PVC etc. This adhesive exhibit excellent wash and dry cleaning resistance.
Application:
DS001TS development direction and application is on garment accessories, footwear, handbags, luggage, embroidery, crafts ofadhesive.
Composition:
Co-polyester
Physical Characteristics:
Milk white translucent
Release Liner
release paper
Density
1.15±0.02g/cm3
Conventional thickness
0.05mm ,0.08mm, 0.1mm, 0.12mm, 0.15mm, 0.18mm
Washing
40°C/72H
Width scope
5mm-1500mm
28±5g/10min;
Condition:ASTMD1238-04
RheologyTemperature
100°C -100°C
Length
100 yards
Operating Temperature
130°C -160°C
Finished Products Specification
480mm*100yards/roll
Recommended Bonding Conditions:
Machine Setting: 120℃-140℃
Machine Setting: 130℃-160℃
Dwell Time: 5-15 seconds
Dwell Time: 8-25seconds
Pressure: 0.3-0.6mpa
Pressure: 0.3-0.6mpa
1, Bonding temperature and pressure as well as the time involved in the strength of the film to material. Bonding temperature must be close to the machine set the temperature, the pressure must be uniform, mold and pressure roller must be flat.
2, In different machinery and materials, the bonding conditions used will be different. The conditions marked here are only basic.The optimum bonding conditions should be made by creating suitable construction conditions for the particular application damage,direct or consequential, arising out of the use, misuse or inability to use the product.Customer Feedback
Related products
Packing & Delivery
packing: 100 yard in roll, 2 rolls in case
shipping: 5-7daysCompany Profile
Certifications
FAQ
1 .How about hot melt adhesive film?
It is just a film, and the basic material is release paper. But the film is solid in room temperature, when reach its melt
point, it is able to bond other materials, Different materials of hot melt adhesive film have different performances and different usages, we need understand your demands ,then recommend you right products to you.2.Do you accept OEM or ODM?
Yes ,we accept OEM and ODM, we are professional heat transfer material manufacturer ,having more than 10years experience. able to assist you R&D new products. So if you need bonding some special materials, please don't hesitate to let us know.3.How do you transport the products?
If you are not urgent, we usually transport by ship because it is the cheapest way. But for the West Asia area,
we deliver by train because there is no sea to ship. And for samples and urgent cargo, we transport it by air as it is the fastest way .Of course if you have other better idea about transport, we will accept it.4. May I have your samples?
If you need some sample for reference, please let us know your fully address/ship mode with courier ,and we will arrange sample for your reference.5. How long is the lead time?
Sample lead time:3-7 days Bulk lead time:7-10 days(depends on order quantity)6. How do I pay for my order?
We accept T/T , Paypal .Contact Us