Dongya 16Ga T50 Pneumatic Nail Gun Brad Nailer

Dongya 16Ga T50 Pneumatic Nail Gun Brad Nailer
Feature:
(1)Light die cast body of aluminum alloy
(2)"Contact mode"safety system
(3)Remain nail display available
(4)Side loading system
(5)T50-HK201 can use 16 GA. brad nails
(6)FST50-HK201 can use 15 Ga. cement nails
(7)Size:282*88*264mm(11.1*3.46*10.39in.)
(8)Net weight:1.95kgs(4.29Ibs)
(9)Operate pressure:5-7.5kg/cm^2(75-110Psi)
(10)Main applications:decorate, furniture Dongya 16Ga T50 Pneumatic Nail Gun Brad Nailer
information:
(1)Gauge:16
(2)Head:3mm(0.118")
(3)Size:1.6mm*1.4mm(0.063"*0.055")
(4)Length:15-50mm(9/16"-2")
Cement nails information:
(1)Gauge:15
(2)Head:3.2mm(0.13")
(3)Size:1.8mm(0.07")
(4)Length:15-50mm(9/16"-2")
(5)Nails Picture:Dongya 16Ga T50 Pneumatic Nail Gun Brad Nailer
Company Information
Our Services
No. SymptomProblemsSolutions1.1Air Leak Air leak in the cylinder cap when tools don't work 1.Loose head valve piston seal or o-rings .Check and replace the head valve piston set2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap Check and replace o-ring or cylinder cap gasket under the cylinder cap1.2Air leak in Trigger area when tools don't work1.Damaged o-ring in trigger valve Check and replace o-ring2.Damaged o-ring in trigger valve stem Check and replace o-ring3.Dirt in the trigger valveCheck and clean the trigger valve1.3Air leak in cylinder cap when tools are working 1.Damaged head valve piston o-ringsCheck and replace o-rings2.Damaged seal under cylinder cap Check and replace seal1.4Air leak in nose when tools are working 1.Worn or damaged bumperCheck and replace bumper2.Loose driver(piston unit) threadCheck and replace driver(piston unit) 1.5Air leak in Trigger area when tools are working1.Worn or damaged trigger valve headCheck and replace trigger valve head2.Damaged head valve piston o-ringsCheck and replace head valve piston o-rings2Failed to get driver(piston unit) back to the correct position completely.1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled.Straighten the driver(piston unit) or verify driver guide(nose) and magazine 2.Worn or damaged nozzle Check and replace nozzle 3.The space between piston o-ring and cylinder is too tight.Check if the cylinder is adequate lubrication or replace the o-ring on the piston.