heat setting stenter machine used for knitting and woven fabric

Heat Setting Stenter Machine
Heat Setting Stenter Machineis mainly used for the cotton, polyester, wool, hemp of setting process for the open width fabrics, after worked by the machine, you can get stable size of the fabricHorizontal infeeding fabrics tentingInfra-red expanding and centering two roll padderTension synchronous control systemtwo roll padderPhotoelectricweftstraigtner(customer provide)lower overfeedingscrew expandingscrew expandingupper overfeedingedge spreaderinfra-red inspectoroverfeeding and pin ontenting and settingCoolant airPin offExitplaiter or rollingFabrics feeding:
lTension adjusting frame
lUpper and lower roller spreader,
lInfra-red centering device, machine body,
lSlider type rectifying roller
lRectifying executive device
Padder
Horizontal structure,
The two roller is parellel when in a free state
Overfeeding pin on system
lThis system means the completely machine head system,
lmain operation area,wholly machine main operation is on right and left panel(or operation beam),
lThe operator stand on padal,left side is manual panel,right is HMI.
Heating area fabrics infeeding
Air curtain protection system,pin off inspection device,breathadjust device,steam box,wool brush fabrics pressing device,fabrics clip closing device,fabrics edge gumming device.
Guie rail and chains
Horizontal tenting frame,steel rail,alloy slide rail,High manganese steel chain,copper pin plate,Nickel plated steel needle
Heating chamber:
hot air blowers, chambers, heating system, filter net, exhaust moisture system, machine body, and insulation boards,hot air motor2X11KW/chamber,exhaust moisturemotor2X5.5KW/set
Exit
This section include: cool air system,clip opening system,edge cutting and sucking system,main pin off system,main active plaiting system,static electric removal device,HMI touching screen.
Instant monitoring system
lThe machine is equipped with real-time monitoring system.
lThe camera is mounted in the fabrics exit area, and show the fabrics exit state.is taken out.
lMain screen is on the right side of the operating area.
lThe operators can observe the cloth immediately, and can communicate with each other through the front and back intercom.
Electric system
lPLC programmed,control all main driven motor inverters,the motor speed adjusted by inverter,speed will be synchronizedby encoder signal.
lEach chambere hot blower controlled by double inverter,adjust the upper and lower air volume.
lEach machine has four paralleling electrical cabinet.
lMachine main speed shown on the big screen
lLarge screen display table for host speed
lMachine faulty will show on main screen.
l
Pneumatic system:
Air-water apart device, filter device, decompress device, electric controls direction changing valve. Air pipe,