Silver Palladium Conductor Paste

Product Description
Product Name:
Silver Palladium Conductor Paste
Grade Specifications:
PC-AgPd-8200 is lead-free
Usage Note:
Mainly used in thick film circuits, as well as the production of related discrete components.
Product Details
First, the slurry performance indicators:
1. Appearance: The silver-palladium conductor paste is a paste with uniform color, and the color changes from light to dark gray with the increase of palladium content.
2. Silver palladium slurry performance indicators: BrandPC-AgPd- 8203PC-AgPd- 8205PC-AgPd- 8210PC-AgPd- 8215PC-AgPd-8220Silver/palladium 97/3 95/5 90/10 85/15 80/20Solid content%81±181±181±181±181±1Fineness μm ≤10 ≤10 ≤10 ≤10≤10Viscosity Pa·s400±100400±100400±100400±100400±100
Second, the performance indicators after firing: BrandPC-AgPd- 8203PC-AgPd- 8205PC-AgPd- 8210PC-AgPd- 8215PC-AgPd-8220Resistance MΩ/# 3-5 4-8 10-14 12-16 15-20SolderabilityExcellentExcellentExcellentExcellentExcellentInitial peel adhesion ≥40N/ 2x2mm2 ≥40N/ 2x2mm2 ≥40N/ 2x2mm2 ≥40N/ 2x2mm2 ≥40N/ 2x2mm2Aging peeling ≥40N/ ≥40N/ ≥40N/ ≥40N/ ≥40N/Focus2x2mm22x2mm22x2mm22x2mm22x2mm2Solder resistance1 time 1-2 time 4-6 time6-8 time7-9 time
Third, the recommended process:
1. Stirring: Stir well before use.
2. Recommended printing thickness: 10-15μm
3. Screen material and mesh: nylon mesh Inch 250-300 mesh
Stainless steel wire mesh Inch 260-325 mesh
4. Drying: After printing, it is placed in an oven at 150 ° C or under an infrared lamp for 15 minutes.
5. Sintering process (recommended): sintering in tunnel furnace, sintering peak temperature 850 ± 10 ° C, peak holding time 10 minutes, sintering cycle 45-60 minutes.
Fourth, matters needing attention
1. Safe use: If the slurry is accidentally swallowed, inhaled or in contact with the skin, it is harmful. Therefore, it should be thoroughly cleaned immediately after use. Avoid contact with eyes, skin or clothing. Do not get close to fire or burning materials. Because it is flammable, it should be tightly closed when not in use, avoid inhaling volatile gases, and keep air flowing during use.
2, the slurry is a ready-to-use product, without dilution, if you need to dilute, do not add more than 3% (weight ratio), too much diluent will directly affect the performance of the slurry.
3. The thickness of the printed circuit itself should not be lower than 4μm, otherwise the conductive performance is unstable.
4, the slurry should be stored between 4 ~ 25 ° C, cool and dry place.
5. Storage period: The original packaging is sealed for six months. Packaging & ShippingOur ServicesCompany InformationFAQ