Blood Warmer Machine For Blood Fluid Warmer

Blood Warmer Machine For Blood Fluid WarmerProduct DescriptionProduct DescriptionTECHNICAL DATA Nameinfusion device blood warmerPower supply
100 - 240VAC/50-60Hz Power consumption
1.5A/115 VAC 1.0A/230VAC Fuse
2xT2.5A/250V Type of protection against electric shock Degree of protection against electricshock
BF Applied part;Defibrillation-protected
Degree of protection against ingress ofliquids
IPX2
Temperaturesetting Accuracy Overheat switchoff Low temperaturealarm
32±1°C(89±2℉)
Warming uptime Operatingmode MDDClassification
IIb according to rule9
Dimensions:(LxWxH) Warmingprofile
WP-143505, length 1.4 m, for infusion tubeÆ3.5-5mm(O.D.)
(Refer to the label ondevice)
WP-146505, length 1.4 m, for infusion tubeÆ6-7mm(O.D.)
Heating power
60W
Weight After the device be fixed stable,itcannotbepull orapplicationofforceanywaytoavoidtheinfusionstandsorsupportstippingover.Failuretodosomayresultindamagetothe device,the device may drop down with the infusionlineandprevent or interrupt the infusionflow. INSTALLATION AND OPERATION PROCEDURE
Installation: Check whether the deviceisdamaged. Please do not useitifany damage hasbeenfound. Fix the device firmlytothe infusion stand at the position of 20-30cm belowtheinfusion/blood bag, using the clamp at the back, then screw the fastening screw.Thedeviceisalmost equal to the dripbucket. only use infusion stands orpolesthat are sufficientlystable. Before connecting tomainspower supply, check the voltage specified on thedevicelabel. Connect powercableto power supply. The display lights on and beeps. The deviceisinSTANDBYmode.
Warning:
Do not locate the device at the position whereit isdifficulttobedisconnectedfrom
the mainspower. Fig.4:Illustration of the fastening clamp Operation procedure Glide the roll clamp next to the drip bucket oratthe end of the infusiontubing. Empty theairintubing tomakeinfusion channelready. Takethe primed infusionlineat 2-3cm to the end of patient sidetoinsertinthe tail(smallend) of the warming profile. Afterwardsmoveyour thumb over the infusionlineandpressthelinegently into the groove towards the head (big end) of the warming profile, untiltheinfusionline iscompletely wrappedinthe warmingprofile. Place the endsofthe warming profile into the holder to prevent the infusiontubecontacting with theground. Press thekeyor the keytoselect the desiredtemperature. Adjust the appropriate infusion rate. As soon as infusion is started, press the keytostartwarming . Resetting of temperature can onlybeperformedinStandbymode. If the infusion needsto be stopped for more than 3 minutes, press the keytostopwarming. By press the keyagaintoresumeit.
Warning: The warming profilemustnotbeplaced directly on patient's skintoprevent scald by build-upheat. Fig.5:Illustration of the holder of warming profile
Shutting down the device Press the keyto enterSTANDBYmode. Release all pressureinthe infusion system by switching off the pressure cuffs orinfusionpumps. Remove the consumable material from the warming profile and disposeitaccording totherelevantregulations. Disconnect the device from the powersupply.Clean and disinfect theequipmentaccording toinstructions.
Warning:If the over- temperature alarm is triggered or any suspected malfunction be perceived while in operation, the supply of liquid to the patient must be immediatelystopped. Lock the connection tube to the patient, release all pressure in the infusion system by switching off the pressure cuffs or infusion pumps. Switch the device off or pull the mains plug out. The medium being used in the device must no longer be administered to the patient. Wait about 5 minutes until the warming profile has cooled down. Switch thedevice on again. If the fault occurs again, the device must be inspected by a trained service technician. CertificationCertification Our Company Our Company


1.We are specializing in the production of infusion device blood warmer ,first aid kits, military bags, and their configurations are on our series.
2.Our advantages: Customizedservice, printed logo, full-color types ,good price with high quality,delivery on time,durable and so on.
3.Wehave a professional 24-hour customer service professional.ifyou have any question about ourinfusion device blood warmer ,you can ask anytime. Our ServiceOur Service
01.OEM Service : Dear customer ,we are factories which can do OEM business,please provide your samples you may need to make or dressing samples,the LOGO or any spectifications adout the products,we will try our best to make dream product you want.
02.Sample Service: We could offer the sample for free charge,but do not pay the cost of freight. FAQFAQ
1.Are you a manufacturer?
Yes,we are.We have over 6 years experience in designing and manufacturing First Aid Kits.
2. What sets your products apart?
Compared with our competitors:first,we offer higer quality products at an affordable price;second,we have a large client base.
3. How about the minimum order quantity(MOQ) and minimum order amount(MOA)?
For the First Aid Kits and empty box or bag , The MOQ is 500 Sets. For other medical items, the MOA is USD 2000 per order.
4.Where is your main market?
America,East European,Africa,Asia ,India,Philippines,Britain,Australia,Canada,Bangladesh and so on.
5.Do you support OEM service?
Yes, your designs and logos are welcome.
6.How long is your delivery time?
Generally speaking,we can deliver the goods within 15 days if the goods are in stock, otherwise it is about 20-30 days.It depends on the quantity and order time.
7.Do you provide samples first?
Yes,We can provide small amount of sample and do not pay the cost of freight,but the freight will be refund once order /confirm/ied. If you want big amount of sample, please pay them first and we will refund you when you place the order to us.
8.Can I change the contents in the bags/boxes?
Yes,you can.The contents are optional. Category First aid kitStretcherImmobilization SeriesFuneral SeriesMilitary SeriesTourniquetTraffic SeriesBlood
How to contact us?
*Send your inquiry details in the below forFree SampleclickSendnow!