Solar Power Plant Thermal Energy Storage Material Price

ENE HTS-1Molten Salt / Heat Transfer SaltProduct DescriptionComposition:40%KNO3-60%NaNO3Operatingtemperature:290℃~600℃ High heat transfer efficiency and precise in temperature control
Features:
Thisproductisfunctionedasaheatcarrier,ithasthecharacteristicsoflowmeltingpoint,highheattransferefficiency,stable,accurateoperationtemperaturecontrolling.Itisverysuitableforheatexchangeandheattransferprocessinlargescale;itisanidealreplacementforsteamandheattransferfluid.Furthermore,thisproductisnonflammable,hasnoexplosionhazardandlowtoxicityinsteam.Underthecorrosionspeedof0.1mm/a,itshallapplywithferriticheatresistantsteelwhentemperatureislowerthan475℃anduseausteniticsteelwhentemperatureishigherthan475℃.
Packaging&Storage
1.In25KG/50KG/1000KGnetweightpackinginPP/PEbag,orcustomizedpackageavailableupon
request.
2.Storedinadry,wellventilatedwarehouse,awayfromheatsource,fire.
TechnicalParameters
Model
ENEHTS-1
Constituents
KNO3-NaNO3
(40-60wt%)
Density(kg/m3)(300℃)
1725
Kinematicviscosity(cp)(300℃)
3.26
Heatcapacity(kJ/(kg.K))
1.495
Thermalconductivity
(W/(m.K))(385℃)
0.52
Maximumfilmtemperature/℃
650
ProductDescription
Subject
ENEHTS-1Index
Grade
Premium
First-Class
Qualified
Chloride(Cl),ω/ppm≤
100
200
300
Sulphate(SO42-),ω/ppm≤
10
30
50
Water-insoluble,ω/%≤
0.002
0.005
0.010
Iron(Fe),ω/%≤
0.001
0.002
0.005
Operationtemperature/℃
290~600
Application
Excellentheattransfermedium,itisoftenappliedinpetroleum,chemicalandthermaltreatmentindustries.Itisveryapplicableforheatexchangeandheattransferprocessinlargescale.IthasbeenwidelyusedinCSPstationforthermalstorage.Packaging & Shipping
25kg woven bag or according to customers' requirement.
Directions for use:
Heat transfer molten salt can be heated directly to make it melted in trough or melted by adding water in super-high temperature carrier. Being melted to such a degree to be able to circulate ,then send it to heat-carrying furnace to reach target temperature.
Matters need attention:
1. Molten salt should be kept clean, do not allow to mix with organic such as charcoal, rosin, reducing substances etc, to avoid arousing fierce chemical reaction.
2. At the beginning of heating, controlling heat-up speed strictly, to avoid system temperature unstable.
3. Keep flowrate of heat cycling steady, forbid temperature higher than Coating temperature.
4. Forbid water and organic matter intermingle when being used in high teperature.
5. When temperature exceed600 degree, Molten salt become unstable, it begin to react and release gas.
6. When appear quite a lot sediment in heat medium molten salt, should renewal the old molten salt.
7. Before stop working, all molten salt must be sent back to store molten salt trough,then engine can be cut.Our Services
Customerservice:
Itisourprimarygoaltomeettheneedsofourcustomers.Ononehand,thecompany
focusesonproducts’researchanddevelopmentandbuildingaprofessionaltechnical
servicesteam;ontheotherhand,itisimprovingtheservicestructurebyclose
communicationwithcustomerstoprovidebetterpre-salesservice,salesservice
andafter-salesserviceforthem.
Pre-saleService:
Weprovideprofessionalconsultingservicesandcustomizeproductsaccordingto
customers’needs.
SaleService:
Weensurethequantity,quality,timelydeliveryofordersandprovidewarehousing
andlogisticsservicesaccordingtocustomers’needs.Wenotonlyprovidewarmand
thoughtfulpre-salesserviceforourcustomers,butalsoattentiveserviceduring
shipmentanddelivery.
After-salesservice:
Weofferprofessionalsolutionsbyanalysisandconsultationatsighttosolvethe
customers’problem.Accordingtothefeedbacksfromcustomersandmarket,
wewouldbringoutfeasibleprojectsandvaluablestudiestomeetthecustomers’
needs.
Thescopeofservices:
(1)Weofferenergystoragesystemsolutionsforfree;
(2)Weofferheattransferfluidandmoltensaltofvarioustemperatureranges;
(3)Weofferstorage,transportation,melt,fillinganddebuggingservicesofmoltensalt.Company Information
Heat Transfer Salt Constulant