7L fog machine ULV cold fogger portable electric hospital disinfection sprayer

Product Description
7L fog machine ULV cold fogger portable electric hospital disinfection sprayer
Product Name:
Disinfection sprayer
Material:
Plastic PE
Power supply:
220V50Hz or 110V 60Hz
Medicine box capacity:
7 L
Spray range:
6-8 meters
Motor power:
600-1000 watts (Controlled by smart version)
Power cord:
5 M
Spray volume:
400ml / min (Adjustable)
Fog particles:
less than or equal to 50 microns (Adjustable)
This fogger machine is suitable for sanitation and epidemic prevention, disinfection, sterilization, insecticide. It is great to apply in daily life, which is widely used in schools, hospitals, nursing homes, greenhouses, stables, warehouses, residential and farm.
Detailed Images
Maintenance Tips
(1) The filter screen should be cleaned after the fogger machine works for 20-30 hours.
(2) After use, pour clear water into the medicine box for cleaning, and start the machine for 2-3 minutes for spray cleaning.
(3) Cut off the electric after use to avoid danger.
(4) If it is not used for a long time, before storage, it should be cleaned completely, air-dried and stored in a cool and dry place.
Operation in use: Do not exceed the scale mark when adding the liquid medicine to prevent overflow. When stopping spraying, close the liquid medicine regulating valve first, and then shut down the machine.
1. Brief Introduction
The sprayer has wide applied fields and can be used for sanitation and epidemic prevention in hospital,restaurant, hotel and other public places. It also can be used in hen house, sheepfold. cowshed,hogpen and so on. it is an ideal electric sprayer with reliable performance and convenient use.
2. Operation Instructions
(1). Close the throttle valve and press the switch to the 0(OFF)position. Unscrew the lid of chemical tank and add a solution of less than 7 liters according to the requiredratio. Tighten the lid of the chemical tank.
(2). Insert the power socket, unscrew the throttle valve to the appropriate position, lift the machine by hand or hang it on shoulder, hold the nozzle, press the switch to I (ON)the machine will spray: press the switch to 0(OFF) position, the machine will automatically shut down
(3). Turn the throttle valve to adjust the size of the fog and its amount of spray. Turn the throttle valve counter clockwise, the amount of fog becomes larger, and the fog particles become larger too. When the throttle valve is turned clockwise, the amount of fog become smaller, and the fog particles become smaller until theamount of fog is 0, and the size of the fog is 0.
(4). After use, the throttle valve must be turned clockwise to prevent the liquid from flowing out.
(5). When the lid of the chemical tank is tightly sealed the amount of mist will become larger, and when the lid of the chemical tank is not completely sealed, the amountof mist will become smaller. In order to achieve high performance, be sure to tighten the lid.
(6). Please read the precautions carefully.
3. Precautions
(1). This sprayer is not allowed to spray or fill with flammable, explosive and corrosive substances such asalcohol, gasoline, benzene and high-concentrationdisinfectant (the disinfectant must be diluted before use)
(2). Please do not use the sprayer in a closed room. Afterthe spray is finished, close the doors and windows to increase the application effect and ensure the health ofthe person.
(3). It is forbidden to clean the sprayer by liquids suchas Banana oil or gasoline. When cleaning the appearance of the machine with water or other neutral detergent, care should be taken not to al low water or neutral detergent to flow into the motor casing.
(4). After each use, the unused liquid must be poured out and the liquid should not pollute the environment. And itis very important and necessary to add water to thechemical tank and start spraying for about 0.5-1 minutesto clean the machine pipeline to avoid the corrosion of the machine and incrcase the service life of the machine
(5). It is forbidden to be placed in a high temperature environment or under the sun for a long time to prevent the machine from being baked to deform, fade or crack.
(6). Do not unplug the plug by pulling the power cord. Please unplug with hand by holding rubber part of the plug
4. Preliminary failure check
If the sprayer has the following faults, you can do apreliminary check to eliminate the fault. If the preliminary inspection cannot solve the problem, you can contact the manufacturer for consultation
*First, the motor doesn ' t work
(1). Check if the machine power switch is in I(ON)position
(2). Check if the plug is securely inserted or if the socketis loose or damaged
(3). Check if the power is normal
*Second, amount of fog is reduced or weakened
(1). Check if the internal pipeline of the machine is folded,twisted, blocked or damaged.
(2). Check if the suction port is blocked
(3). Check if the throttle valve is damaged
(4). Check if the lid of the chemical tank is tightly sealed
Our Services
FAQ
We have 3 years warranty under the right use .The banquet chair frame we have 5 years warranty When loading we will Prepare some oil painting in the container. If your chair scratches in future, you can repair it.