CE approved LED Dental lamp for dental unit

CE approved LED Dental lamp for dental unit
Product Description
Scope Of Application
This Product is mainly applied to the dental clinic for illuminating the mouth cavity of patient.
Structure
Installation
Installation steps:
1. As shown in Figure 1, plug the male connector into the female connector securely;
2. As shown in Figure 2, plug the Connection Shaft between the Cantilever and LED Holder into the hole of Cantilever, align the Screw Holes, and then tighten up the Hexagon Socket Screw; and
3. As shown in Figure 3, install the Decorative Sleeve on the Cantilever.
Working Environment
Working environment
Storage and transportation environment
Ambient temperature
5~30℃
Transport temperature
-30~70℃
Relative humidity
30~75%
Relative humidity
-10~+100%
Atmospheric pressure
70~106kPa
Atmospheric pressure
50~106kPa
Technical Parameters
Input voltage
AC12V-24V
Power
10VA
Illumination
5000LUX
Color temperature
4000k±300
Net weight
1.2kg
Gross weight
1.5kg
Instructions
1. Press down the orange "On/Off" touch key on the right to switch on/off the Light;
2. Press down the "Brightness+" touch key at the middle to increase the brightness incrementally from Level 1 to Level 6;
3. Press down the "Brightness-" touch key to decrease the brightness incrementally from Level 6 to Level 1;
4. The Light has a memory function to maintain at the Brightness Level selected the last time when the Light is switched on again;
5. After powered on, the Light comes into the inductive switching mode, under which the Light will be activated/deactivated by a hand swinging within a range 0~15mm to the inductive point;
6. Three shafts can be rotated freely, and the Light can be positioned at a wanted position by adjusting the angle of Handle;
7. The Handle can be removed for sterilizing at high temperature periodically;
8. Removal/installation of Handle: slide the button along the direction as shown by Arrow in Figure 4, and move the whole Handle along the direction as shown by Arrow to remove it. Plug the bottom end into the lower hole, and then plug the top end into the upper hole to install the Handle. Installation is completed when a click sound is heard.
Daily Service and Caution
Use the gas from the triplex dental jet, or soft cotton cloth or wet tissue, to clean the Light.
Caution: Don't use any corrosive liquid when clean any surfaces of the Light!
Detailed Images
Certifications
CE & FDA & ISO
Packaging & Shipping
Packing: Packed in Carton
Shipping: by sea, by air or express.
Our Services
Company Information
Nanjing FoiNoe Co. Ltd is a specialized supplier of dental/medical equipments, dental furnitures. Our number one priority is customer satisfaction and we achieve this through professional customer support and quality products. Our knowledge and experience in the health care market ensures that we provide our customers with exceptional service.
Factory pics
Send your message to us and click “Send” now