PVC PP PE Single Wall Shrinkable Corrugated Pipe Making Machine

Product Description
Product Application
The line shall be used to produce small diameterr single wall corrugated pipe in PE/PVC and PP raw material.Molding corrugated pipe with smooth inside and outside surface,and even ripple at one time by corresponding die.Used as electricity pipe,washing machine drain pipe,dust collector pipe and ventiduct,etc.

Technical Parameter

Pipe Line Model
Diameter Range(mm)
Extruder Model
Max Output(kg/h)
Max Machine Speed(m/min)
Main motor power(kw)
Line Length(m)
FST-32
Φ12-Φ32
SJ45
50
25
22
10
FST-50
Φ32-Φ50
SJ65
100
25
45
10


Characteristic1.High cost performance and long life
2.High stability and precision performance
3.High automation degree
4.High production efficiency
5.Good after-sales service






The advantages of plastic corrugated pipes
1. With both rigid and flexible: has sufficient mechanical properties, at the same time has excellent flexibility.
2. Compared with the plate pipe, corrugated pipe has lighter weight, save material, lower energy consumption, cheaper;
3. corrugated pipes with smooth inner wall can reduce the flow resistance of liquid in the pipe, improve the transmission capacity;
4. Good performance in resistance to chemical corrosion, can resist the effect of alkali in the soil.
5. Pipe with corrugation form can increase the load resistance of the pipe to the soil, at the same time, do not affect its flexibility,so that it can be laid on the uneven ground continuously.
6. Easily to connect and good in tightness . Easily handing, easily install, reduce the labor intensity, reduce working period.
7. Wide using temperature range, inflaming retarding, self-extinguish, safety in use.
8. safe insulation, is an ideal material for the electric wire conduit.
9.Gear rack design with good performance of corrugated machine.10. Mold block with durable and wear-resistant ,also suitable for medical use.
11.Max.speed can be 25m/min by Fosita design.
12.All line is equipped with Siemens PLC.
Screw diameter: 65mm
L/D Ratio: 33:1
Screw&barrel material: 38CrMoAlA
Motor: 45kw
Frequency inverter :DELTA
Barrel heating method:Cast-alumium heating, with stainless steel protection
Output:130-200 kg/h
Temperature Control: Ormon
Contactor: Dexili

Motor: 3kw
Frequency inverter: ABB
Production speed:20-25m/min
Quantity of shaping mold:72 pairs per set
Cooling method:Water cooling

Inner diameter of coil(mm):can be made as your request
Outside diamter of coil(mm):can be made as your request
Working method: pneumatic
Certifications
Our Company
Our Service
a.After being informed machines ready for inspection, customer can send engineers to our factory.
b.After the machines are delivered to customer's factory;We will send one or two technicians to the factory after preparation work is completed;Technicians will be responsible for guide on-site installation and testing machines.
c.Meanwhile technicians will give free training lessons to labors in customer's factory.
Customers Service
Packing & Delivery
FAQ
Contact US