All Purpose Industrial Building Ceramic Tile Joint Sealant Adhesive

Product Name
All Purpose Industrial Building Ceramic Tile Joint Sealant Adhesive

Product Description


Introduction
Two- component epoxy adhesive for gap filling and decoration of tile and marble and stone wall and floor. Main components are epoxy resin, curing agent and various pigment. A perfect substitute to tradition gap filling mortar. It has more available colors, and much easy to apply. It can be used for interior or exterior application on floors and walls, aperture around the close stool and sink, skirting.




Main Property: 
Eco-friendly
anti-mildew
stain-resistance
high hardness



Non-shrinkage,
Waterproof & oil proof
wear-resistant
high and low temperature endurance.

Scope Of Application 
Epoxy tile grout can be arious type of ceramic and tile, marble, granite, window, furniture, kitchen counter edge line , floor and wall tile, TV backdrop wall, mosaics etc. 

Application
Attention
1. it is a must to squeeze out around 5-8cm and discard, otherwise, the former 5-8cm material cannot cure completely due to the two part haven't be mixed well2 the rubber tube mouth needs to be trimmed a little bit bigger to meet your demand since the regular size is too small to be squeezed out easily3. Do not keep the mixed glue inside the rubber nozzle more than 20 minutes because it will be curing. If the interval time to long, change another nozzle and squeeze out 5-8cm again. 4. do not operate when the aperture is wet, otherwise, color will change.5 when clean the gap, take the cement out as long as 3mm depth is clean, the dust and cement attached on gap sides should be taken out, if not, the glossy and smooth effect could not be achieved as we except6 if apply in temperature bellow 15 centigrade, the glue may not be squeezed out as usual, try to heat it in warm water around 60 centigrade for 15-20minutes
Packaging & Delivery
Packaging details:  400ml/cartridge , 25cartridge/ carton

Port of Loading: Guangzhou/ Shenzhen / Other Main Port in China


Lead time: 7-30 days


Main Products
Epoxy Tile Grout.


Epoxy Anchor Adhesive
Nail Liquid Glue
 
Marble Glue
 
Epoxy Resin
 
Epoxy Rsin AB Glue for Dry-hanging
 
Our Company
Deshibao (Guangzhou) Technology Co., Ltd is a chemical engineering enterprise engage in R&D, production, sales, and technology service of construction use adhesive and stone use adhesive. The company started since 2001. Headquarter and R&D Center Located in International Creative Community, Guangzhou Civilian Science & Technology Park, Baiyun District, Guangzhou; factory situated in Zhongluotan town, Baiyun District, Guangzhou, cover an area of 12,000 square meters. 

The company is the largest manufacturer for epoxy glue in south China, the products involves in construction and stone industries, including: Epoxy glue, Epoxy resin, Marble glue, Epoxy tile grout, Anchor adhesive, Liquid nail, Caulking sealant, Tile adhesive, Water-proof coating, Water-base putty etc. 

We believe quality gets market. The excellent quality of Deshibao products derive from dedicated Research & development and rigorous quality control. Cooperating with international chemical industry giant BASF, Union Carbide, BYK, TOSOH etc., Deshibao develop several new products and at the same time insure the quality of raw materials and end products. By cooperating tightly with South China University of Technology, Sun Yat-sun University, Peking University and CTC Institution for long term, we upgrade the product quality continuously, which make the products and brands' market share increase and reputation improve constantly.

Certificate
Exhibitions