Squix Printing Labeling Machine Automatical Labeling Machine Thermal Transfer Printer With Applicato

OverviewApplicator S1000
Real-time labeling
The applicator S1000 combined with a SQUIX is a cost-effective solution for all dispensing printers in semi-automatic operation or when vertically integrated in a production line. The label is placed on the product with a stroke cylinder. ApplicatorS1000-220S1000-300S1000-400Cylinder stroke mm220300400Tamp stroke
below device mm64144244Compressed air bar4.5
Applicator S3200
Real-time labeling
The applicator S3200 combined with a SQUIX is a cost-effective solution for all dispensing printers in semi-automatic operation or when vertically integrated in a production line. With the S3200 printed labels are automatically applied on a product. By means of a rotary cylinder the label is positioned 45° to 95° to the horizontal and placed on the product with a short stroke cylinder.
Information on service life, pre-dispensing, compressed air regulation unit, process reliability and supporting air correspond with the applicator S1000. ApplicatorS3200Rotary cylinder45°- 90°Stroke cylinder up to mm30Compressed air bar4.5
Tamp pads or blow pads are manufactured according to the label size. Tamp padBlow padA3200-1100M3200-1100A3200-2100M3200-2100Material guideLeft alignedCenteredLeft alignedCenteredTamp surface W x H min. mm72 x 6072 x 60Label width mm20-11620-116Label height mm5-8010-80Product surfaceFlatProduct during labelingNot movingNot moving or in motionDispensing module S5104
For labeling on packaging on a conveyor belt. The product sensor identifies the labeling position. Dispensing is started and at the same time the next label is printed. Conveyor belt speed and print speed have to be synchronized. A reflective sensor monitors the positioning. Demand moduleS5104S5106To be used withSQUIX 4.3, SQUIX 4SQUIX 6.3Material guideLeft-alignedLabel width mm25-11650-176Label height mm25-200Distance from print line to peel-off plate mm336-518Product surfaceFlatProduct heightFixedProduct during labelingIn motion, speed synchronized with the printerCycle time approx.1)60 labels/min
Calculated with label height 100 mm, print speed 100 mm/s
FunctionsApplicator S1000
1 Long service life: The ball-bearing guides are low-wearing.
2 Flexible product heights: With the stroke cylinder labeling is possible at different heights. Different stroke lengths are available.
3 Compressed air regulation unit: Micro filters prevent from contamination. The compressed air regulator ensures a permanent high quality of labeling.
4 High process reliability: Supporting air jet stream, induction air and stroke speed are adjustable. For sensitive products and packaging the pressing force can be reduced to less than 10N (1kg). To avoid contamination, the vacuum holes are cleaned with air pressure after each labeling process.
5 Label sizes: Labels widths from 25 to 176 mm and heights from 25 to 200 mm can be processed.
6 Supporting air: Used for blowing the labels onto the pad
Pre-dispensing button
To test the labeling process. Pushing the button causes the label to be printed and held by the pad. Pushing the button again starts the labeling process.Product Images