T8 glass tube glue dispensing machine, automatic glue dispenser for T8 glass tube, 400pcs/h capacity

GDS basic glue dispensing machine for T8 glass tube working theory is as following.Put six PCB strips downside on the fixturesticks. Six PCB strips on the fixturesticksare being gluedwhile being inserted to the glass tube. The tubes press down for few seconds and stick with PCBs. The whole process is finished when the sticks are pulled out and tubes are transferred to the next work station. That's how T8 glass tube glue dispensing machine works. GDS automatic glue dispenser can perfectly replace manual operation to get glass tube and PCB strip sticked together tightly.
Machine FeaturesSpecially designed for T8/T5 glass tube, glue valves are working at the same time, the designed capacity is 400 pcs/h;Standard model is suitable for tubes in length of 600mm,900mm,1200mm(bigger size needs customization);Equipped independent dispensing valve for each of six glue tracks. Glue dispensing volume is accurate and fast without glue drawing, drops or leakage;Operation steps include: paving strips/placing tubes, glue dispensing/tubes coating, pressurization, separation, tubes picking and upside down placing;Pressurizing time can be set on the touch screen of controller according to glue nature
Technical Parameters
Model
TD-1206
Working Range
Max≤1200mm
Moving Speed
Max≤300mm/sec
Repeat Accuracy
±0.05mm
Power Source
Pressed Air+Assisting Cylinder
Glue Dispensing Volume
Depends on Glue Viscosity
Glue Container capacity
2600mlSilicone Pressure Barrel
Glue Viscosity
Max≤20000CPS
Control Mode
PLC+Touch Screen
Programming
Teaching Programming
Program Capacity
At least 100units,4000 points/unit
Transmission Mode
Stepping Motor+Synchronous Belt+Linear Guide-way
Working Pressure
0.5-0.8Mpa
Working Power
AC220V 50HZ/2000W
Working Temperature
0-40℃
Working Humidity
20-90% no condensation
Dimension
3200*750*1550mm(WxDxH)
Weight
about 300KG