ISO 12127 EN 702 Contact Heat Transmission Tester for

ISO 12127 EN 702 Protective Clothing and Material Contact Heat Transmission Tester
Introduction:
ISO 12127 EN 702 Protective Clothing and Material Contact Heat Transmission Tester is designed and manufactured according to ISO12127-2007 and EN702.
ISO 12127 EN 702 Protective Clothing and Material Contact Heat Transmission Tester uses the heating cylinder to provide a constant temperature while contacting with the sample under a certain load, and a calorimeter to measure the heat transfer properties. This ignitability tester is easy to operate, the data is accurate and reliable, widely adopted in fire protective clothing companies and inspection departments.
Application:
Safety protection
Protective Clothing and Material
Standard: ISO12127-2007Clothing for protection against heat and flame -- Determination of contact heat transmission through protective clothing or constituent materials EN702Protective clothing. Protection against heat and flame. Test method. Determination of the contact heat transmission through protective clothing or its materials
Specification:
1, This clothing ignitability tester is consists of a control box and stainless steel test gantry.
2, The sample holder is automatic lifting, lifting speed is 5mm ± 0.2mm/s.
3, The K type sheathed thermocouples, diameter 2mm, temperature measurement accuracy
is 0.1 ºC.
4, Heating barrel temperature is higher than 500℃, the contact surface of the sample diameter is 25.2±0.05mm.
5, Barrel heating load weight 49N, is adjustable.
6, Timer scope 0 to 99999s, timing accuracy up to 0.1s.
7, Calorimeter fixed disk diameter is 25mm, thickness 5mm, and assembled with platinum resistance temperature sensor.
8, Support frame material is nylon 66, diameter 40mm and height 50mm.
9, Specimen diameter should be 80mm.
10, PLC and touch screen for an intelligent control system.
11, PID intelligent temperature control system, automatically collect temperature data.
12, Test data is automatically calculated and stored by the system, the test result can be printed freely. Product NameISO 12127 EN 702 Protective Clothing Contact Heat Transmission TesterTest table size 650mm x 350 mm x 650mmPower supply220V 50 / 60Hz, power 800w, can be customizedWeightabout 50 kgAmbient TemperatureOperating25±5℃Gas Supplies requirementPropane and air compressed air
Contact Us: