plastic injection blow molding moulding machine

plastic injection blow molding/moulding machine
Features:
1,Excellent mechanical strength, impact-resisting, and non-cracking bottle mouth and thread are of precise measurement, enabling 100% close match with the bottle cap.
2,The weight of the product can be preset with consistency.
3,The measurement and thickness of the product can meet the requirements of the design without any deviation. The surface of the bottle mouth and the body is of good luster and smoothness.
4,No rough selvedge will occur at the mouth or bottom of the bottles, which can save raw material.
5,There is no joint seam on the bottom of the bottle; And the strength is improved.
6,The joint seam on the bottle body is smooth.
7,Accord with GMP authentication requirements
Characteristics:
1.Adopt vane pump and Japan, Yuken Hydraulic flow proportional valve, it could saving 15-20% power at least.
2.Apply the double vertical pole and single horizontal beam to make enough rotation space, longer bottles, make the mold installation easy and simple.Model: GT 30
Unit
Data
1
Dia.of screw
mm
40
2
Screw L/D
20
3
Shot volume
cm3
200
4
Injection weight
g
142
5
Injection pressure
Mpa
175
6
Max.screw stroke
mm
165
7
Max.screw speed
rpm
10-225
8
Heating capacity
Kw
7.5
9
No. of heating zone
Qty
3
10
Clamping & blowing system
11
Clamping force of injection
KN
300
12
Clamping force of blowing
KN
43
13
Opening stroke of mold platen
mm
120
14
Lifign height of rotary table
mm
60
15
Max.platen size(LxW)
mm
350x240
16
Min.mould thickness
mm
180
17
Heating capacity of mould
Kw
1.2~2.5
18
Stripping system
19
Stripping stroke
mm
180
20
Driving system
21
Motor power
Kw
15
22
Hydraulic pressure
Mpa
14
23
Product range
24
Suitable bottle range
L
0.005~0.8
25
Max.bottle height
mm
≤170
26
Max.dia.of bottle
mm
≤100
27
Other
28
Dry cycle
Second
6
29
Min.air pressure
Mpa
1.2
30
Discharge rate of compressed air
m3/min
>0.8
31
Water flowage
m3/h
3
32
Total rated power with mould heating
Kw
22.56
33
Dimension(LxWxH)
mm
3100x1350x2280
34
Net weight
T
3.7
Materials:suitable for majority kind of thermoplastic resins such as HDPE,LDPE,PP,PS,EVA and so on.
Cavity number of one mould corresponding to product volume.(For reference)
Product Volume
8 ML
15 ML
20 ML
40 ML
60 ML
80 ML
100 ML
Mold Cavity quantity
7
6
5
4
4
3
3
Production line layout draft