Rc Hydraulic System

Product Description
(1). The picture (Ⅱ) is the drawing of the jack
(2). Working principle
When you use the jack, you should put the lifting rod into the jack to make the two fixture blocks (up and down) work. When the pump start working, the oil will enter the cylinder body from the under nozzle. The upper clip can automatically lock the lifting rob and the next clip is losing at this time. Under the oil pressure, the lifting rob will be lifted. The rod will stop lifting when the pump stops supplying fuel after the piston finishing a stroke. The lifting process is finished. When the pump returns oil, the oil will enter the cylinder body from the upper nozzle. At this time, the follow clip will lock the lifting rob. Under the oil pressure also, the piston will backhaul and the hydraulic oil will be released from the down nozzle. After they finishing a part of work, the pump will stop supplying oil and the two clips (up and down) will loosen. Then you should put rob down or put it out. Repeat the cycling indefinitely, until the end of the entire wPackaging & Shipping
After Order,15 to days to 30 days delivtFAQ
Q1:What's the brand name of your products ?
A :Own brand "GX", WE ARE GERMANY OWNED FACTORY. OEM is also available as required.
Q2:Hydraulic cylinder internal leakage?
A: There are 3 main reasons causing internal leakage :Overload,polishing is not well controlled,bad seal kits.As is known to all,vehicles in China are often overload,our products all designed to bear the overload power.We have numerical control machine to assure the polish processing .And we use the imported seals to meet customers' demands.
Q3:Does your piston rod get ruptured easily?
A: Hard chrome plating quenched and tempered 45# steel for piston rod to assure sufficient hardness and toughness.
Q4:Is your design reasonable? What about your product safe coefficient?
A:We have R&D team with abundant design experience. We also established production, education, and research cooperation with universities . Rest assured.
Q5:What about the quality feedback of your products?
A: Guarantee the qualityfrom the raw material. WE ARE GERMANY OWNED FACTORY, and we have cold drawing production line and nickel-chrome electroplating production line , so we can produce cold-drawing pipe and hard-chrome pipe used for hydraulic cylinder.
WE HAVE NEVER RECEIVED EVEN onCE QUALITY COMPLAINT FOR MANY YEARS OF INTERNATIonAL TRADE.
Q6:Is the sample free?
A:Because our equipment is a complete set of systems, no samples are available for the time being. We can provide video and construction case video for you to answer.
Q7:How about the delivery time?
A: Over 1000 sets advanced equipments to meet customer's large demand in short delivery time.Generally ,it's 7-20 days.
Q8:What 's the after-service?
A:Service: GX promised to respond to customers products quality or service in 24 hours reported, and solutions shall be provided in 48 hours.