53L 500C Vacuum drying Oven (16x13x14" ) With Gas Flow-meter, Chiller & Vacuum System- HB-V

53L 500C Vacuum Oven (16x13x14" ) With Gas Flow-meter, Chiller & Vacuum System The HB-VDO-6050-HT500P series oven is CE certified. This oven is using an advanced temperature controller which comes with a RS485 computer comunication port and is able to be computerized. Also it can be heated up to 500°C and able to hold the temperature for long period with the support of compact chilling water recirculating system. A 500-5000ml flow meter is installed in the front panel for user to simply control and create a gas environment in the chamber. All necessary accessories are in the package including vacuum pump, chiller, fittings, hoses, etc.SPECIFICATIONSVoltage208 -240VAC 50/60HZ (Power cable is included w/o plug)Power2200WHeating TempContinuous: 50~400°C<= 1 hour for staying at 500°CRecommended Heating Rates10 ºC/min: 0ºC- 100ºC7 ºC/min: 100ºC- 200ºC7 ºC/min: 200ºC- 300ºC3.5 ºC/min: 300ºC- 400ºC2.3 ºC/min: 400ºC- 450ºC0.4 ºC/min: 450ºC- 480ºC0.2 ºC/min: 480ºC- 500ºCChamber and DoorChamber dimensions:415 mm x 345 mm x370 mm (16.3 x 13.5 x 14.5", 53 Liter )The chamber is structured with stainless steel and welded with bracing pieces.Aluminium Door with thermal insulationSilicone door gasket and positive latch door ensure the good sealing2stainless steel shelves are included to facilitate processing efficiency.Temperature Controller30 segments programmableBuilt-in over-temperature protection+/- 5°C accuracyTemperatureuniformity:+/-5°C@100°C,25"Hgatcenter 8"x7" areaonlySoftware interface for PC contrl is avaliable. Please select it in option bar.Gas flowing/purgingA precise flow meter is installed in the front panel which ranges from500 ~ 5000ml/min.The gas is able to be continuously flowing into the chamber at a constant flow rate defined by user during operation.The oven can be purged by inert gas before operation.Water CoolingoneDigital Temperature Controlled Recirculating Water Chilleris included .( click picture below to see details)Refrigeration range : 5~35°CFloowing Rate: 16L/minuteSuggestusing anti-corrosion coolant (available for auto-part store)to achieve best water cooling.The watercooling jacket is built inside theoven door.Fittings & ConnectorsOne KF25D vacuum port is used for quick connection tovacuum pump.Two water/coolant inets connects the chiller. (tubes are included)One 1/4" swagelok tube fittings is for inert gas supply.One needle valve is used to control the input gas.Vacuum Pumponerotary vanevacuum pump withwith Exhaust Filteris included.Vacuumn level of oven after pumping < 133pa (2 torr)Power:1/2HP 375WPlease click the pic for more spec.Dimensions & Weight48" x 40" x 42"; 420 lbsCertificationCE CertifiedUL / MET / CSA Certification is available upon request,additional charges will applyTemperature controller is MET and CE CertifiedTransformer is UL CertifiedApplication NotesFor accurate temperature measurement, you may do calibration by using the temperaturecalibrating kit.For more information on how to calibrate oven temperature, please review How to calibrate the oven.You may addGas Purifier collum on gas inlet of oven back to remove oxygen and huminityYou may order a mobile table to put the oven on ( click pic below righ to order )You may order spare silicone sealing ring for the door by click picture below righ.AttentionPlease note that it's normal the SS chamber wall will be slightly deformed and loose its shine at high themperature. However, this won't affect the use of the oven since the sample will be placed on a shelf and won't have contact with the chamber wall.