Product Description
Wood glue for veneer/wood finger joint/wood laminated
Product Features:
This product is a polymer modified resin with acrylic acid, compounded with application of advanced science and technology. Easy to use, high bonding strength, fast drying time, good low temperature mode, and has excellent resistance to water,toxic pollution, a new generation of environmentally friendly adhesives. imported raw material, mainly used for solid wood furniture, advanced type of furniture, wooden handicrafts, such as Jigsaw, finger jointed, wooden veneering, etc. Can be used for processing after the Office furniture.
Technical Parameters:
Price:12000CNY/T
Model: AE-5802
Classification: Water-based
Appearance: Milky white adhesive liquid
Viscosity(25℃ cps):9000-10000CPS
PH: 6.5-8.5
Solid content: ≥55%
Residual Monomer:≤0.3%
Adapt temperature: Above 5℃
Curing time(25℃): 20-30 minutes
Wood damage rate: Above 95%
Adhesion compression shearing strength: 15mpa/72h
This product conforms to GB / 18583-2008 standard
Adhesion technology:
1. The sticky material (wood) adhesive face should level off, without bending, no dust. The moisture content of timber should be controlled within15%.
2. And single glue brush. Coating must be uniform,not local lack of glue.
3. Pressure (pressure) is 8 kg/cm. Pressure is usually 60-90 minutes. Allsteps must be tightly controlled, otherwise affect the bonding effect.
4. Shelf life: 5 ℃ to 37 ℃, sealed storage for six months.
Control, wood
1. moisture control: 14%
2. maintain a mosaic of flat, not wavy or crooked, twisted face the emergence of flexible wood (l such as oak, ash, and so on))
3. the mosaic divides the surface of wood before wood dust.
Second, adjustable plastic method
1. when leveling stabilizer, according to holding size adjustable rubber of the rubber apparatus, adjustable rubber appliances can only be used in adjusting the volume of one-third gel, or it will cause the glue reaction foam over.
2. Please select flat round plastic bucket rubber is the best, this container is easy to mix fixed agent.
3. can add water to the glue or other substances, or the solidification or intensity afew drops.
4. General requirements for the deployment of puzzle glue was curing agent in thefull 12 hours (finish up after the bubble again with better results).
5. unused hardener must strict sealed storage cannot be mixed with water, so as to avoid hardening are scrapped.
6. curing agent mix has confirmed that arbitrary changes, otherwise it will seriouslyaffect the bond strength and water resistance of key performance
Three, glue amount controls:
Users according to the day's temperature and humidity determine gelatinize.
Low temperature, high humidity, (80%), hard wood, glue less.
Humidity (60%), the wood is soft, glue more
Four, coating methods
Adhesive viscosity (consistency), the glue is the best for manual coating machine, pig hair brushes or rubber knife to evenly coating, sizing control in between 150g-250g/per square metre (hardwood glue between 120g-150g/per square metre), soft wood sizing between 120g-250g/per square metre.
Artifacts to piece together as soon as possible after brushing to prevent colloids film, so as to avoid false mosaic very easy to open.
.
FAQ
Packaging & Shipping
Packing
base
IBC container (1200KG/barrel) --- Size: L1.25 x W1 x H1.2 (M) --- 20' Container: approx. 10 barrels
Curing Agent:
3kg/barrel , 10kg/barrel, 250kg/barrel
MOQ
1 Ton
Delivery Date
7~15 days, depends on Qty
Payment
T/T, L/C
Product Show
SHANDONG HanShiFu Adhesive Co.Ltd
Phone(whatsapp):+86 15153909617
WeChat :xiaobaoer921
Skype:cherryhan211
Add: Hedong district, Linyi city, ShanDong, China