Comply CE Infant Warming Incubator With Price Premature Baby Incubator With Warmer Portable Baby Incubator For Sale

Comply CE Infant Warming Incubator With Price,Premature Baby Incubator With Warmer,Portable Baby Incubator For Sale
Product Description
STANDARD COMPOSITION:
Servo Control Mode: air temp;
Instant Parameter Displaying: set temp, air temp, heat power rate;
Audible & Visual Alarms: power failure, sensor failure, higher/lower temp, air temperature override, fan failure;
Power failure reset memory and self-test function;
Hood with dual slope: 4 hand-ports
SPECIFICATION
POWER
Model H-800-1E: 110 / 120 V ac, 50Hz / 60Hz
Model H-800-2E: 220 / 240 V ac, 50Hz / 60Hz
Power Input: ≤400VA
Refer to IEC60601-1, this equipment belongs to ClassⅠ, Type BF Its operation is continuous
ALARM
Power Alarm
Power Failure: Activates if primary power to the Incubator fails or the power wire is accidentally disconnected from the wall receptacle
Fan Alarm
Fan Failure: Activates if Fan motor malfunctions
Sensor Alarm
Air Sensor Failure: Air Sensor malfunction, refer unit to service
Deviation Alarm
High Air Temperature: Activated if displayed Air Temperature is 15°C above set point
Low Air Temperature: Activated if displayed Air Temperature is 25°C below set point
Over Temperature Alarm
Over Air Temperature: Activated when displayed Air Temperature was approach 38°C in Air Mode
System Alarm
System Failure: Activated if Temperature Control System malfunctions

TEMPERATURE ConTROL RANGE AND CORRELATIVE SPECIFICATIONS
Air Temperature: 20°C~37°C
Temperature Rise Time: ≤30min
Temperature Variability :±0.5°C
Temperature Uniformity: ≤1°C
ENVIRonMENT REQUIREMENT
Environment Temperature
Operation Temperature Range: +20°C ~ +30°C
Store Temperature Range: -40°C ~ +55°C
Environment Humidity
Operation Humidity Range: 30%~75%
Store Humidity Range: 10%~100%
Atmospheric Pressure Range : 700hPa~1060hPa
OTHER SPECIFICATION
Noise Level Within Hood Environment :≤55dB(Environment noise below 45dB)
Carbon Dioxide (CO2) Level within the Hood: Less than 0.5% when a mixture of CO2 in air is delivered at 750ml/min at a point 10cm above the center of the mattress
Air Velocity Over Mattress: less than 0.3m/s
Infant Bed Max Load: 10kg
Transfusion Shelf Max Load: 2kg
FACTORY DEFAULT SETTINGS
Temperature Control Mode Air Temperature Mode
Air Set Temperature: 32°C
Temperature Units:°C
NOTE: Open Access Panel or Access Door or the use of supplies or other equipment within the Incubator, which can alter the air flow pattern, may effect temperature uniformity, temperature variability, the correlation of the Incubator temperature reading to center mattress temperature and skin temperature

OPTIonAL PART
YC Infant Bed adjustment, adjust tile ±10°with step-less
SC Double wall canopy
GL Blue light Phototherapy Unit, LED digital timer, display therapy time and total time
GB Top shelf for put other device
HL Protect machine, to prevent hit in moving
YEC Infant scale, to weighing infant weight
SGL
Blue light Phototherapy Unit with up and below,
LED digital timer, display therapy time and total time
Up phototherapy unit used blue tube light source,
below phototherapy unit used blue LED light source

Specification
Specifications of hood
H-3000
H-2000
H-1000
H-800
Mattress to Hood
450 mm
450 mm
450 mm
410 mm
Observation side of hood
Two incline
Two incline
Two incline
Two incline
Operate port
6 (2 Iris ports)
6 (2 Iris ports)
6 (2 Iris ports)
4 (2 Iris ports)
Tubing grommets
4
4
4
2
Front access panel
826x310 mm
826x310 mm
826x310 mm
826x280 mm
Mattress Tray Size
630x360 mm
630x360 mm
630x360 mm
630x360 mm
Technical Specification
Power requirement
≤400VA
≤400VA
≤400VA
≤400VA
Temperature control mode
Air and skin servo control
Air and skin servo control
Air servo control
Air servo control
AirTemp Control Range
20°C~37°C
20°C~37°C
20°C~37°C
20°C~37°C
Temperature override mode to
20°C~39°C
20°C~39°C
20°C~39°C
----
SkinTemp Control Range
30°C~37°C
30°C~37°C
----
----
Temperature override mode to
30°C~38°C
30°C~38°C
----
----
Skin temp sensor accuracy
≤0.3°C
≤0.3°C
----
----
Humidity display range
5%~99%
----
----
----
Temperature fluctuation
≤0.5°C
≤0.5°C
≤0.5°C
≤0.5°C
Mattress temperature uniformity
≤0.8°C
≤0.8°C
≤0.8°C
≤0.8°C
Temperature rise time
≤30 min
≤30 min
≤30 min
≤30 min
Noise level within hood environment
≤55dB
≤55dB
≤55dB
≤55dB
Alarm
Power failure alarm
Yes
Yes
Yes
Yes
Fan failure alarm
Yes
Yes
Yes
Yes
Sensor failure alarm
Yes
Yes
Yes
Yes
High air temperature alarm
+15°C
+15°C
+15°C
+15°C
Low air temperature alarm
-25°C
-25°C
-25°C
-25°C
High skin temperature alarm
+10°C
+10°C
----
----
Low skin temperature alarm
-10°C
-10°C
----
----
Over air temperature alarm
≤38.0°C; ≤40.0°C
≤38.0°C; ≤40.0°C
≤38.0°C; ≤40.0°C
≤38.0°C
Over skin temperature alarm
≤38.0°C; ≤39.0°C
≤38.0°C; ≤39.0°C
≤38.0°C; ≤39.0°C
----
System failure alarm
Yes
Yes
Yes
----
Alarm silence function
Yes
Yes
Yes
----
Operational condition
Environment temperature
+20°C~+30°C
+20°C~+30°C
+20°C~+30°C
+20°C~+30°C
Environment relative humidity
5%~99%
5%~99%
5%~99%
5%~99%
Environment air velocity of flow
<0.3m/s
<0.3m/s
<0.3m/s
<0.3m/s
Others
RS-232Connector
Yes
Yes
Yes
-----
Rail
Yes
Yes
Yes
-----
Infant bed tilt adjusting
±10° step-less
±10° step-less
±10° step-less
-----
Mattress tray Max load
10kg
10kg
10kg
10kg
Transfusion pole Max load
2kg
2kg
2kg
2kg
Cabinet Max load
6kg
6kg
6kg
----
Packing size (2 cartons)
100x58x80 cm
100x58x80 cm
100x58x80 cm
100x58x98 cm(1 carton)
Gross weight
120kgs
120kgs
120kgs
83kgs
FAQ
1.What is time of delivery?
Since our products are produced according to each specific order, the delivery period will be 15 days after confirmation of order. If it is small or sample order, please do check with us about whether we have ready goods in stock to make delivery as soon as possible.
2.What about quality assurance?
We offer one year warranty period beginning from the time of shipment for medical equipment, Per minor problems, we can provide free spare parts for replacements, Per serious problems, we can make replacement of free charge.
3.What is payment terms?
T/T in advance, Western Union.
4.Which shipping company usually using?
MAERSK-LINE, PIL, COSCO, SAFMARINE, MARUBA, APL, CMA, CSAV, K-LINE, MSC, NYK, AND DHL, EMS, TNT, UPS FOR COURIER, buyer's option will be our priority. We will give suggestion according to the schedule and services.
why choose us
Company Information
contact us