Plastic Formwork Sheet Plastic Plywood Formwork Plastic Construction Template For Concrete

Formwork AdvantagesWhat is Plastic Formwork
Hollow plastic building formwork is a kind of energy-saving and green environmental protection product, pp plastic combined with macromolecule nano-technology. It is a new product after wood formwork, composite steel formwork, bamboo-wood bonding formwork and all-steel large formwork. It is energy saving and environmental protection,and can completely replace the traditional steel formwork, wood formwork, square wood, What's more, its amortization cost is very low.Nanotechnology support

The hollow plastic building template is modified by the high-molecular nano-technology, and the original "nano-polymer additive" and the additive can guarantee the toughness of the template while improving the hardness of the template, improve the bending modulus of the template and improve the defects of the conventional plastic building template, The deformation rate of the template is controlled to be within 2mm, the diagonal is controlled
within 0.5 mm, and the construction requirement is better met.
Advantages of plastic formwork
1.Reuse more than 60 times, long service life.
2.High hardness,no expansion,no shrinkage, good tenacity, can withstand a variety of construction loads, products have a certain flexibility, can be used in Radiant buildings, tunnels, bridges.
3.Light weight, complete specification, easy to remove, construction operation and transportation safety.
4.Waterproof, non-hygroscopic,not layered, not swelling, size stable under the water.5.The surface is smooth and clean, and the concrete stripping is good, easy to release the mold.
6.Bearable temperature:-10-70℃,not deformed (within 1-2 mm) in high temperature.

7.It is easy to clean and maintain, so it reduces the cleaning and maintenance cost of the template.
8.Can be used with wood (bamboo) plywood and other materials.
9.no need oil,easily install and remove, only tapping formwork can be falled off, with out release agent.
Easily to handle
Sawing,drilling and nailing are all available. Formwork can be easily combined vertically and horizontally, quick and safe, and the supporting is also easy to operate, advantageous to the construction, effectively improving the construction schedule.
Product Details
Product size
Size
Thinkness
Weight
Densitycontainer loading(pcs)20HQ
40HQ1220*2440mm12mm21±1KG587.8kg/m359012001220*2440mm14mm24±1KG575.8kg/m351010801220*2440mm15mm25±1KG559.8kg/m347010261220*2440mm16mm27±1KG566.8kg/m34409361220*2440mm18mm29±1KG541.2kg/m3390900
12-20mm thickness all we can provide
Product specifications and thickness can be customized to customer requirement
Installation Details
1.Use the hollow building formwork intersecting surface laid with 15mm thick.
2.Wood square of the distance: (1) on the surface of the intersection (spacing: wood square distance according to the thickness of the slab concrete, in general, the thickness of less than 0.15 m floor (spacing is 200 ~ 250 mm.(2) the shear wall (spacing according to adjust the spacing, height and thickness of the wall to wall height of 2800 mm, 300 mm thick wall,

for example, using the formwork (15 mm thickness spacing is 100 ~ 150 mm, if the shear wall, pillar width more than 1 meter, must add the fixed frame.
3.Die shear wall and column puzzle when leaving no gaps, internal Angle (the bottom of the wall) parts must have wood square, beam, wall, formwork connection.Shear wall made 4 after the mold must be assembled into the whole hoisting, then lay flat, reduce labor intensity, forming effect is good.

4. When the nail to the formwork from the formwork edge distance 15 ~ 30 mm, strength wants moderate, nail nails is 40 ~ 50 mm in length, shoulds not be too long or too short.
5.Beam bottom of a piece of wood square must set aside 15 mm seam allowance, wallboard made on wood square seam allowance, it does not leak slurry and wallboard material saving.
Quality Test ReportPacking & DeliveryOur CompanyContactFAQ
1.Q: Are you a factory or trading company?
A: We are a factory of plastic formwork.2.Q: How can I get some samples?
A: We are honored to offer you free samples.3.Q: How does your factory control quality?
A: Quality is priority. We always control from the very beginning to the end , from the raw materials to the production. Every batch of materials, we must test the quality about the impact stength , Vicart , bending strength. Our factory has gained ISO9001:2008.4.Q: How many times does your formwork reused?
A:It can be reused over 60 times.5.Q: Does this formwork stick concrete? and easily remove or not?
A:It doesn't stick concrete and easily remove, even no need any release agent, only tapping can fallen off.6.Q: How to clean the used formwork?
A: only using the high-pressure water gun can make it clean.7. Q: what are your foreigh markets?
A: Middle East countries, Africa countries, the eastern European countries,Oceania countries