EPever EPsolar 30A 12V/24V MPPT Solar Controller Battery Charge Regulator with Max input 100V Trace

EPever EPsolar 30A 12V/24V MPPT Solar Controller Battery Charge Regulator with Max input 100V Tracer3210AN Protect Solar SystemBrief Instruction
The Tracer AN series. based on common negative design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical. Improving the MPPT control algorithm further, Tracer AN series can minimize the maximum power point loss rate and loss time, quickly track the maximum power point of the PV array and obtain the maximum energy from solar modules under any conditions; and can increase the ratio of energy utilization in the solar system by 10%-30% compared with a PWM charging method. The limitation function of the charging power and current and reducingcharging power function automatic improve the stability which works even connecting oversize PV modules and in high temperature, and increase the professional protection chip for the communication port, further improving the reliability and meeting the different application requirementsFeatureAdvanced MPPT technology, with efficiency no less than 99.5%Ultra-fast tracking speed and guaranteed tracking efficiencyAdvanced MPPT control algorithm to minimize the maximum power point loss rate and loss timeWide MPP operating voltage rangeHigh quality components, perfecting system performance, with maximum conversion efficiency of 98%Accurate recognition and tracking of multiple-peaks maximum power pointInternational famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service lifeCharging power and current limitation functionCompatible with lead-acid and lithium-ion batteriesBattery temperature compensation functionReal-time energy statistics functionOverheating power reduction functionMultiple load work modesThe communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection.With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.Monitor and set the parameters via mobile phone APP or PC softwareFull-load operation without any drop in capacity within the range of working environment temperatureExtensive electronic protectionFunctions
• PV reverse polarity protection
• PV short circuit protection
• PV over current alarm protection
• Battery overcharge protection
• Battery over discharge protection
• Battery reverse polarity protection
• Load short circuit protection
• Load overload protection
• Controller overheating protectionData Sheet ItemTracer 1206ANTracer 2206ANTracer 1210ANTracer 2210ANTracer 3210ANTracer 4210ANSystem nominal
voltage12V/24VDC AutoRated charge current10A20A10A20A30A40ARated discharge
current10A20A10A20A30A40ABattery voltage range
8~32VMax. PV open circuit voltage46V92VMPP voltage range(Battery voltage +2V)~36V(Battery voltage +2V)~72VMax. PV input power130W/12V
260W/24V260W/12V
520W/24V130W/12V
260W/24V260W/12V
520W/24V390W/12V
780W/24V520W/12V
1040W/24VSelf-consumption<=12mADischarge circuit voltage drop<=0.23VTemperature compensate coefficient-3mV/°C/2V (Default)GroundingCommon negativeRS485 interface5VDC/100mALCD backlight time60S (Default)Environmental ParametersWorking environment temperature-25°C~+50°C(100% input and output)Storage temperature range-20°C~+70°CRelative humidity<=95%, N.C.EnclosureIP30Dimension172x139 x 44mm220x154x 52mm172x139 x 44mm220x154x 52mm228x164x55mm252x180x63mmMounting dimension130x130mm170x145mm130x130mm170x145mm170x164mm210x171mmTerminal12AWG(4mm 2 )6AWG(16mm 2 )12AWG(4mm 2 )6AWG(16mm 2 )6AWG(16mm 2 )6AWG(16mm 2Recommended cable12AWG(4mm 2 )10AWG(6mm 2 )12AWG(4mm 2 )10AWG(6mm 2 )8AWG(10mm 2 )6AWG(16mm 2 )LCD Screen DisplayAccessories options
Optional accessories(Remark:the price here do not include any accessories,if you need ,please contact me for price)
ote Temperature Sensor
(RTS300R47K3.81A)
Acquisition of battery temperature for undertaking temperature compensation of
controlparameters, the standard length of the cable is 3m (length can be
customized). The RTS300R47K3.81A connects to the port (4th) on the controller.
NOTE: The temperature sensor short-circuited or damaged, the controller
will be charging or discharging at the default temperature 25°C
USB to RS485 cable
CC-USB-RS485-150U
USB to RS-485 converter is used to monitor each controller on the network
using Solar Station PC software. The length of cable is 1.5m.
TheCC-USB-RS485-150U connects to the RS-485 Port on the controller.
Remote Meter
MT50
MT50 can display various operating data and fault of the system. The
information can be displayed on a backlit LCD screen, the buttons are
easy-to-operate, and the numeric display is readable.
WIFI Serial Adapter
eBox-WIFI-01
After the controller is connected with the eBox-WIFI-01 through the standard
Ethernet cable (parallel cable), the operating status and related parameters of
the controller can be monitored by the mobile APP software through WIFI signals.
RS485 to Bluetooth Adapter
eBox-BLE-01
After the controller is connected with the eBox-BLE-01 through the standard
Ethernet cable (parallel cable), the operating status and related parameters of
the controller can be monitoredby the mobile APP software through Bluetooth
signals.Related Products