SBS spray adhesive sofa glue for sponge scouring pad foam

SBS spray adhesive sofa glue for sponge scouring pad foam
Item No. HN-308A
Description,
GOOD SBS Spray Adhesive formulated with good-quality raw materials and conforming to national compulsory standard-GB18583-2001 requirements of restriction of harmful and hazardous substance, possesses such features as low VOC, fresh smell, high solid content, good flexibility, easy application, strong dhesive force, environment-friendly etc. And after hardening, it can be resistant to damp, water, heat, acid, alkali and bumping, so it is widely used for bonding sponge, scouring pad, heat- insulated materials, fiber, wood and thin metal sheet.
Technical data,
1. Appearance:light yellow liquid
2. Functional Component:methyl ethyl ketone
3. Solid Content:25%-35%
4. Viscosity:110-150cps(25℃)
5. Tack time:8-12min
6. Storage:stored in dry and cool environment
7. Shelf Life:6 months
Advantages,
1.Environment friendly: benzene free, no hazardous materials and additives and low VOC.
2.Best bonding effect can be achieved even under temperature around 60°C.
3.Fast drying speed and long viscosity-keeping time.
4.Strong bonding strength and good initial bonding power; water-proof and ageing resistant.
5.Easy application. It is easy to apply the adhesive evenly on the bonding surface and no adhesive legging occurs.
Direct ions for use
Surface preparation
the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere.
Spraying
Apply the adhesive evenly on the two bonding surfaces with spray gun and the consumption is 80 - 90 g/m2. Spray gun with an
opening of 2.0-2.5 mm and 0.3-0.5 Mpa air pressure is recommended.
Thickness control
The adhesive should be applied evenly and not too thick to avoid the weakening of the bonding strength. But for porous materials
or materials with coarse surface, you can apply more accordingly.
Airing
After application of the adhesive, enough time should be given to let the solvent evaporate completely to avoid bubble or
stickiness. The airing time is about 5-15 minutes/25C and varies from the temperature, humidity and adhesive film. The bonding can
be done after the surface is dry by touch. For porous materials, you can bond directly after application of the adhesive.
Bonding
The application should be done once and for all. Aim the two surfaces, bond together and press. Don’t move the bonding surfaces
back and forth, or the bonding effect will be affected.

Applications,
It is suitable for bonding different materials such as sponge, heat-insulated materials, fiber, wood and thin metal sheet. Widely used for scouring pad,sofa,mattress.
Packing,
Net2.5kg,12kg,140kg per drum
Contact,
Ms Merry,
Wechat/mobile 0086 139 2315 5895
Skype merryliu88