SG20 Classical implant 20:1 Reduction surgical handpiece contra angle
Product Description
Parameter:
Push button
Rotation speed :5~2000RPM
Fiber optical glass rod
ergonomic desige ,more hygeian.
Sterilization : up to 135 ℃
Applicable bur : Φ2.345-2.355mm
Fitting with E type motor , can be avaible to match up with Swiss, Japan, Korea famous brand implant system.
Stainless body,easy to disassemble and clean
Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135℃.Please do not use the acid solution to scrub, inject or soak the handpiece.
Please do not autoclave the handpiece with residual chemical substances.
Handpiece should be packed well and place at clean and dry room without dust, sulfur and salt.
Please do not touch the handpiece immediately after autoclaving. ModelPhotoFeatureSG20
*20:1 Reduction
*External and internal cooling (Kirschner and Meyer)SG20L
*20:1 Reduction
*External and internal cooling (Kirschner and Meyer)*with Glass Optics lightSG20 LED
*20:1 Reduction
*External and internal cooling (Kirschner and Meyer)*with LED light
Implant motor & irrigation implant tubes supplying
Related Handpieces
1. General High speed handpieces
2. Fiber Optical Handpieces (for 6 holes handpieces tube)
3. General Low speed handpieces
4. Special reducing speed handpiece (1:5/20:1 etc.)