Oil Well Rubber Body Top and Bottom Cementing Plug

Oil Well Rubber Body Top and Bottom Cementing Plug
cementing plugs are the most widely used plugs in the world. They are specially designed with a positive wiping action to insure clean casing.
Plugs are available in a wide variety of sizes and stocked for immediate shipment. To order, just specify part number(s) listed on charts. Special sizes available on request.
Top Plugs
The bottom section of the cup is designed to exert continuous pressure on the casing wall. The core is made ofaglass-filled high strength phenolic resin core. The tapered base fits the cavity of the bottom plug for a positive seal. A solid rubber top plug is available on request.
Bottom Plugs
Like the top plug, the fins and tail section provide positive wiping action. Fins also serve as a seal while cementing. They are specially designed with aglass-filled high strength phenolic resin core.A rubber diaphragm at the top of the plug ruptures after the plug is seated allowing cement to flow through.
Torque tests of the compressed 7" Quick Drill™ wiper plug at room temperature exceeded 2000 ft lbs of torque resistance. With time and wellbore heat the bonding to the inner wall of the casing becomes greater. Quick Drill™ wiper plugs saves rig time as actual recorded drilling time for a set of 7-5/8" plugs was less than 10 minutes. easy drill high strength cement aggregate in their patented Float Equipment, assures a good combination of rig time savings plus an excellent opportunity at no secondary cement squeezing.
Technical Parameters of cementing plug
CasingCasingWeightRange WiperFinO.D
Working
Temperature
Working
Pressure
Burst
PressureHardnessSize(in)mminmmin41/2"14.14-17.269.50-11.601104.331-30℃to150℃≥15MP1MP-2MP75-955"17.11-35.8611.50-24.101224.80351/2"20.83-39.8814.00-26.801355.3157"25.30-56.5517.00-38.001706.69375/8"35.72-63.6924.00-42.001857.28395/8"53.57-79.6236.00-53.502359.252133/8"71.43-107.1548.00-72.0033313.11-30℃to150℃≥10MP20"139.89-197.9394.00-133.0049819.606
Product Advantage of cementing plug

1. Cementing plugs are manufactured of graded rubber that is fused upon a composite or Aluminum core.
2. This top plug can be used when dual plug system is not required and Bottom cementing plug can be used when dual plug system is required.
3. These plugs are completely PDC drillable.
4. Operating range of temperature with Aluminum core is up to 200 degree Fahrenheit.
5. Plug can be ordered for higher operating temperature and operation in either synthetic or mud fluids.
6. Available in 4 1/2" to 20 "sizes + any special sizes.