Heavy type Chemical Protective Suit in Safety Clothing

Properties
1. Chemical Protective Suit in Safety Clothing
2. Chemical Protective Suit
3. Heavy type Chemical Protective Suit
Detailed Images
Specification
RHF-I Chemical protective class one ensemble for firefighters is specially designed for fighters to protect them-self from being damaged by chemical substances when in fire spot or in accident spot.
RHF-I suits will not getting flux and dropping only carbonization. Sewing to the use of frame-resistant and adhesive strong the Nylon, with both-sides being covering with chemical protective and fire-resistant rubber. Both-surface chemical resistant rubberized fabrics, then process it into the clothing and gloves in glue of laminating then combine with a chemical protective and fire-resistant and spike-resistant of boot to make up a set of clothing.
1.Specification dimension
SIZE
S
M
L
XL
Clothe size(cm)
160
166
171
177
Chest(cm)
55
56
57
58
Waistline(cm)
115
122
125
126
Boots size(cm)
25
26
27
27
Suit body(cm)
165-170
170-175
175-180
180-185
2.Requirement of main technical:
(1)main rubberized fabric
Thickness of cloth: 0.45±0.05mm
Breaking strength: ≥450N/5cm(warp and filling)
Tear strength: ≥32N
Acid resistance: It soak in 80%H2S04,60%HN0330%HCL for 1h.(liquid highly 10mm)It is not permeate.
Alkali resistance: It soak in 6.1 mo1/LNa0H for 1h,(liquid highly 10mm) It is not permeate.
(2) Rubber boot performance: The boot of chemical protective clothing can according to the need of customers for producing fireproof boot or buying fireproof boot. Fireproof boot and firefighting boot performance as follows:
Fireproof boot
Firefighting boot
1.Boots of stab resistance:≥780N
4.Boots of oil resistance:-2 -10%
2.Boots of pressure resistance: ≥5000
5the rate of adherence ≥600 N/m
3.Boots of leakage resistance (submerse
in water with 2 hours it’s not permeate.)
6.Boots of pressure resistance: ≥5000
4.intensity of adherence≥0.78kN/m
7.after aging its elongate rate ≥75%
Firefighting boot
8. Boots erode resistance
1. pull apart the rate of elongate≥750%
9. Boots heat resistance ≤22℃
2.Boots impale resistance ≥900N
10.Boots slid resistance ≥115°
3.Bootsgrind resistance ≤0.9cm3/1.61km
11.weight ≤1.8kg
(3) Finished product
Furring adherence intensity ≥0.78KN/m.
Boots of Water permeability resistance (It is not permea-bility after being eroded in15min by 5 water showers nozzle of 3L/min.
Overall weight: ≤ 8 Kg
3.mode:Q/310225 FZC001-20114.
4.Caution:
(1)It is not from being directly contact by frame and melting substances.
(2) Check it up before using it not damaging clothing.
(3) After using it, the clothing should be cleaned with 0.5%--1%.Solution of Na2CO3 or soap water. Carefully packing it up after drying it.
(4)It should be kept in cool and non-sunlight place protected against active chemical substance and gas lines.
(5)Expiry date: five years.
Factory Photos