Small Strong Magnet Electric Magnet Neodym Magnet

neodym electric meter magnetProduct Description
small strong electric neodym 10*1 10*2 10*3mm magnet
Plating Characteristics Plating TypeOverall ThicknessSalt Spray TestPressure Cooker TestNiCuNi (Nickel Copper Nickel)15-21 μm24 hours48 hoursNiCu + Black Nickel15-21 μm24 hours48 hoursNiCuNi + Epoxy20-28 μm48 hours72 hoursNiCuNi + Gold16-23 μm36 hours72 hoursNiCuNi + Silver16-23 μm24 hours48 hoursZinc7-15 μm12 hours24 hours
Each individual layer of Nickel and Copper are 5-7 μm thick. The Gold and Silver plating layers are 1-2 μm thick.
Test results shown to allow comparison between plating options.
Performance in your application under your specific test conditions may vary.
Salt Spray testing conducted with a 5% NaCl solution, at 35 ℃ .
Pressure Cooker Test (PCT) conducted at 2 atm, 120 ℃ at 100% RH.
neodym electric meter magnet

More products
small strong electric neodym 10*1 10*2 10*3mm magnetCompany Information
Advanced Equipments
We have developed 6 Stamping production lines, with biggest hydraulic pressing machine of 2500ton and mechanical pressing machine of 800ton,and progressive dies of pressing is available. Besides the Stamping production lines, we also equipped with a welding production line with welding robot, an assembly line and a machining production line. Besides our own equipments, we have also professional suppliers of assistant industries, like surface treatment suppliers of powder coating, zinc plating, hot dip galvanizing, E-coating etc.
Main customer & Products application
Our main customer include: Huawei, Foxconn, etc.
Main products application: Auto parts, Leisure shooting parts, Outdoor & Indoor articles,Garden instrument parts etc.
Capacity & Service
We have a staff of 400 members with annual capacity of 10,000tons. based on our strength, passion and capacity, we devote to supply one-stop service to customers, who will be warmly welcome to visit us.Our customers:The feedback from our customers:CertificationPackaging & ShippingFAQ1.What are neodymium magnets? Are they the same as "rare earth"?Neodymium magnets are a member of the rare earth magnet family. They are called "rare earth" because neodymium is a member of the "rare earth" elements on the periodic table. Neodymium magnets are the strongest of the rare earth magnets and are the strongest permanent magnets in the world.2.What are neodymium magnets made from and how are they made?Neodymium magnets are actually composed of neodymium, iron and boron (they are also referred to as NIB or NdFeB magnets). The powdered mixture is pressed under great pressure into molds. The material is then sintered (heated under a vacuum), cooled, and then ground or sliced into the desired shape. Coatings are then applied if required. Finally, the blank magnets are magnetized by exposing them to a very powerful magnetic field in excess of 30 KOe.3.Which is the strongest type of magnet?N52 Neodymium (more precisely Neodymium-Iron-Boron) magnets are the strongest permanent magnets in the world.4.How is the strength of a magnet measured?Gaussmeters are used to measure the magnetic field density at the surface of the magnet. This is referred to as the surface field and is measured in Gauss (or Tesla). Pull Force Testers are used to test the holding force of a magnet that is in contact with a flat steel plate. Pull forces are measured in pounds (or kilograms).5.How is the pull force of each magnet determined?All of the pull force values we specify have been tested in our laboratory. We test these magnets in two different configurations. Case 1 is the maximum pull force generated between a single magnet and a thick, ground, flat steel plate. Case 2 is the maximum pull force generated with a single magnet sandwiched between two thick, ground, flat steel plates. Case 3 is the maximum pull force generated on a magnet attracted to another magnet of the same type.Contact information
If you want to get more infomation,please feel free to contact me, your inquiry will be highly appreciated