Product Description
AT305B Electric Falling Dart Impact Tester (original HY4241-II) is used to determine the impact resistance by free-falling dart method. It can be used for plastic films, sheets and composite films e.g. PE preservative films, wrapping films, PET sheets and other food package and heavy package, aluminum foils and aluminum plastic composite films, paper and paper board etc. It can meet the request both of method A and method B.
Principle:Before starting the test, choose test method, and estimate an initial mass and Δm. Start the test. If the first specimen fails, decrease the mass of the falling dart by Δm. If the first specimen is not a failure, increase the mass of the falling dart by Δm. Continue the test according to this rule. In brief, increase or decrease by Δm according to whether the former specimen is a failure or not. After 20 specimens, calculate the total number of failed specimens N. If N equals to 10, the test is over. If N is less than 10, add specimens and continue to test until N equals to 10. If N is greater than 10, add specimen and continue the test until the number of non-failure specimens reaches 10. Then the tester calculates the test results automatically according to specific formulas.
Feature
★ Build-in micro printer for print test report easily
★ Electromagnetic suspension and automatic release of the falling dart reduce the errors caused by manual operation
★ Pneumatic clamping, 2 starting modes of manual and pedal switch and built-in observation light are convenient to the user's operation
★ Professional software supports multi-unit result display, graphic display of testing process and data export and printing
★ Two test methods of A & B according to standard specifies and automatic determination of testing status
★ Equipped with RS232 port and micro printer port which is convenient for data transmission and PC connection
Specification
Test method
Method A or method B optional
Method A:50 ~ 2000g
Method B: 300 ~ 2000g
Accuracy
0.1g (0.1J)
Specimen clamp
Pneumatic clamp
Air supply pressure
0.6MPa
Port diameter of air supply
Φ8 mm PU Tubing
Specimen size
>150mm * 150mm
Power supply
AC 220V, 50Hz
Dimension
Method A: 500 * 450 * 1320mm
Method B: 500 * 450 * 2160mm
Weight
70KgPacking & Delivery
Packaging
Size(mm)
500 * 450 * 1320mm
Weight
70Kg
Packaging Details
1. The equipment is covered with film is protect it from water vapour during the trip.
2. The box is filled with foam to protect the equipment from impact.
3. Exported wooden box made from plywood, don't need fumigated.
Payment
EXW
30% T/T in advance, paid the balance before shipment
FOB
CFR(C&F)
30% T/T in advance, paid the balance against copy of B/L
CIF
L/C
L/C amount above 50,000 usd, we can accept L/C at sight
West Union
Amount lower than 5000usd
West Union
Delivery Time
7~10days after receiving payment for one container
Company Introduction
Contacting Us