Hangzhou Nanyu Medical Instrument Co., Ltd. established in April, 2004, is located at No.733 Jintang Road, Jiangnan Town, Tonglu County, Hangzhou City, Zhejiang Province, 70km away from the ancient ca...
Products Description Our endoscope has passed the MDR certification of EU of which test in Germany laboratory .The testing including the Disinfection test, sterilization test and cleaning test. In the same area, there are very few companies whose products can pass these tests.If you need,i can share the test report to you. High quality arthroscope, Specification:Φ4x155mm Autoclave 134°Features: - this endoscope is fully compatible with the sheath of Smith & Nephew - Adopt high quality stainless steel materials - Adopt high quality optic fiber and glass - Our endoscope is fully compatible with Storz - Light source is compatible with Storz, Olympus, Wolf, Stryker and ACMI light cable - Can be sterilized by Gas , Soaking,or autoclaving -Can make the customiszed logo free -autoclavable -Related to Urology, Gynecology, Laparoscopy, ENT, Orthopedics etc.. -Outer diameter 2.7mm/3mm/4mm/5mm/6mm/8mm/10mm, -0 degree/12 degree/30 degree/45 degree/70 degree/90 degree/110 degree -with working length: 45mm/50mm/60mm/90 mm/110mm/175mm/180mm/185mm/290mm/302mm/325mm etc. Pls see the Technical Parameter as below 1,SpecificationNYG-1NYB-12,optical performanceColor rendering index under A standard illuminant RaColor rendering index under D65 standard illuminant Ra3,Mechanical properties 3.1 Eyepiece cover size The size and tolerance of eyepiece cover shall meet the requirements of Table 3. Image 1 Shape sketch of eyepiece cover Sheet 3 Specification and toleranceNominal size tolerance b=31.75mm Lower limit -0.10mm,upper limit 0 a=4.7mm Lower limit 0,upper limit +0.1mm θ=50° ±10° 3.2 Seal ed Package 3.2.1 Fog layer For the endoscope with optical elements, the closed interior shall be clean and dry. After the sudden change test from low temperature to high temperature, there is no blurring phenomenon in the interior. 3.2.2 Packaging reliability The endoscope with optical elements shall be able to withstand the following sealing test without failure: a) Water pressure test for 1 m under water for 12 h; b) Cycle 20 tests according to the sterilization or disinfection method specified by the manufacture. 3.2.3 Connect For each connecting part of endoscope, if tight fitting is adopted, there shall be no obvious gap at the fitting position; if welding is adopted, there shall be no uneven concave convex, desoldering, overlaying or obvious pockmarks at the weld position; if gluing is adopted, there shall be no overflow or obvious glue pile at the gluing position and no glue flow mark at other parts 3.2.4 External surface quality of insertion part Except for special purpose, the insertion part shall not have any possible safety injury. 3.2.5 Surface and edge The endoscope and its accessories shall be designed so as not to cause any accidental injury to the human body. All surfaces of the endoscope and its accessories shall be free of fine holes, cracks and burrs. 4, Survivabil For the endoscope and its accessories that can be repeatedly sterilized or sterilized, the disinfection or sterilization method shall neither damage the function nor produce corrosion. 5, Packing The packing should be able to protect the arthroscope from damage caused by adverse storage and transportation conditions. 6 6, Electrical safety performance The dielectric strength of the electric isolation part between the eyepiece cover and the insertion part of the endoscope shall be able to pass the test with the test voltage of 50Hz sine and the maximum current of no more than 0.03ma under 1500V. The safety requirements for interconnection of endoscope and medical electrical equipment shall meet the requirements of GB 9706.1-2007 and GB 9706.19-2000. 7, Environmental test The environmental requirements of endoscope shall meet the requirements of group II of climatic environment test and group II of mechanical environment test in GB / t14710-2009. GJ0312.1 Sheath Needle Φ4x160mm GJ0312 Sheath Φ6x155mm 30° Packing & Shipping