16 colors dyeing liquid A1 A2 A3 A3.5 A4 HT ST UT Dental zirconium ceramic blocks
Zirconia Character
Type
Translucent
Translucency
Flexural strength41%
1200Mpa43%
900Mpa49%
600Mpa41%
1200Mpa
ST
43%
900MpaMulti layer blockST-SST
Top
↓
Bottom
More55%
↓
More43%
Top
↓
Bottom
More900MPA
↓
More43%
Specification
customer feedback
Thank you very much for your recognition of our products.
Use Introduction
Put the finished item to the sintering furance.
Polishing and glazing
Use polishing tool specially made for zirconia to adjust the occlusion and shape of the restoration. After coarsely finishing, proceed to external dying and glazing.
Finished
The whole production is completed.
Storage
Packed blocks should be stored at relative humidity not more than 80% and the room with no-corrosiveness gas and draught.
Noted
Avoiding the rough handling and knocked by hard stuff, the blocks can not be applied for human oral restoration or artificial tooth without the sinter; should operate by certified engineer
Packaging & Shipping
Certifications
Exhibition
Contact us