Product Description
Lumis 150 ST is a non invasive ventilator designed for non dependent patients with respiratory insufficiency. Featuring ResMed's unique volume assurance mode - iVAPS (intelligent Volume Assured Pressure Support) - Lumis 150 VPAP ST maintains target alveolar ventilation to suit each patient's changing needs. Optional AutoEPAP ensures adequate EPAP is delivered to maintain an open upper airway - automatically, while an intelligent Backup Rate (iBR) encourages spontaneous breathing. Lumis 150 ST is also easy to set up and use.Key Features - iVAPSintelligent Backup Rate (iBR)AutoEPAP maintains upper airway patencyVsyncTiControl5 Trigger and Cycle SenstivitiesQuickNav for low touch therapy adjustmentsClimate Control Auto for automatic humidificationRamp and Rampdown for extra comfort.supported by ResScan 5.4
Specifications
Height | 150 mmWeight | 1268 gmBreadth | 255 mmLength | 116 mmSound pressure level | 27 dBA with uncertainty of 2 dBAStandard air filter | Material: Polyester non woven fibre Average arrestance: >75% for ~7 micron dustAircraft use | ResMed confirms that device meets the Federal Aviation Administration (FAA) requirements (RTCA/DO-160, section 21, category M) for all phases of air travel.Modes | CPAP, S, T, ST with optional iBR, PAC, iVAPS with iBR and optional Auto EPAPWater capacity | To maximum fill line 380 mLSensors | Pressure sensor: Internally located at device outlet, analogue gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/minMaximum single fault steady pressure | Device will shut down in the presence of a single fault if the steady state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec.Housing construction | Flame retardant engineering thermoplasticCleanable humidifier | material: Injection moulded plastic, stainless steel and silicone sealOperating pressure range | S, ST, T, PAC, iVAPS: 2 to 25 cm H2O (2 to 25 hPa) CPAP 4 to 20 cm H2O (4 to 20 hPa)Operating temperature/ humidity/altitude | +5°C to +35°C / 10 to 95% relative humidity, non-condensing / Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPaStorage and transport temperature/humidity | -20°C to +60°C / 5 to 95% relative humidity, non-condensingSupplemental oxygen | Maximum flow: 15 L/min (S, ST, T, PAC, CPAP), 4 L/min (iVAPS)Air outlet | (complies with ISO 5356-1:2004): 22 mmElectromagnetic compatibility | requirements (EMC) according to IEC 60601-1-2:2014, for residential, commercial and light industry environments. It is recommended that mobile communication devices are kept at least 1 m away from the device.IEC 60601-1:2005+A1:2012 classification | Class II (double insulation), Type BF, Ingress protection IP22
Packaging & Shipping
Export Worthy
Company Information
Established in the year 2008, NEXUS DIAGNOSTICS. is a leading manufacturer, exporter, supplier and trader from Mumbai dealing in various Specialty medicines and also a well known name among Life Saving Drug and Diagnostic Products.
We develop a synergy and a bond of trust, we develop relations, and help to add life and liveliness to the customers life, through the vast range of best and advanced pharmaceuticals' products for Life saving. We are dedicated people who work together to produce and put efforts to save lives. Can say we are Life saving drug distributors.