Rigid Frame Strander Machine For Sector Shaped Conductors

JCJX-KJ500 Rigid frame Strander Machine For Sector Shaped Conductors
1, Our machine
2, Main technical parameters
This machine (with lumped loading device) is adopted to produce compact conductor of long bare aluminum wire, copper wires and ACSR. it is also used to produce sector compressed stranding conductor and round compressed drawing conductor. The main technical characteristics of the machine is that its bobbins are evenly located circularly (four equal degree dividing) around the cage. It is easy to load and unload due to lumped loading device, the position-setting is both correct and reliable, the rigidity and strength of the machine is high, the general performance of the machine is good. Its rotating inertia is small and running speed is very high. The machine is driven by 36 variable steps drive gear-box, with dual active, dual hauling capstan, its haul force is so strong , the wire distributing collar adopt natural wire distribution for preventing abrasion damage of wire cores when stranding. Wire pay-off tension is controlled pneumatically to guarantee constant tension in full loaded bobbin or empty bobbin. There is a special automatic emergency stop device in case of wire break. The device can control directly every pay-off bobbin in the cage .When wire-broken, the entire machine will automatically stop at once. The machine is suitable for long length, big across-area XLPE cable production.
2.1
Stranding single wire diameter
CU ø1.5ø 4.5mm
AL ø1.8ø 5.0mm
2.2
Max stranding across-area
Round compacted and non-compacted copper conductor: 630mm2
2.3
Speed of frame carriage
6 bobbins 75~174 r/min (total 6 steps)
12 bobbins 48~112 r/min (total 6 steps
18 bobbins 57~133r/min (total 6 steps)
24 bobbins 48~112 r/min (total 6 steps)
2.4
Stranding pitch
47 - 825mm
2.5
Haul-off linear speed
6.87 - 52.2 m/min
2.6
Power of main motor
110 KW DC
2.7
Bobbin type inside frame carriage
PN500
2.8
Haul-off capstan size
Φ2500mm
2.9
Center pay-off reel type
PN500
2.10
Take-up reel
PN1250~PN2800
2.11
Total power of the equipment
142kw
2.12
Total length of the equipment
45M
2.13
Height of center line of the equipment
1100MM
3. After-sell service
3-1. Pre-sale training:
In order to guarantee the customers are able fully to operate the machine, if the customer need, we can help customer training, includes:
(1) Correct operating mode
(2) Correct maintenance way
(3) Remove simple proble
3-2. Guarantees
Since the shipment date, 12 month for mechanical part, and 6 month for electrical parts
4,about us
jiangsu jiacheng was founded in 1990,owing a technical team formed by many experts and engineers,our company is concentrated on making the best products in china and many other countries. we are professional manufacturer in making all kinds of high speed wire drawing machine,rigid frame standing machine,annealing and tinning machine,bunching machine,extruder and so on.
OUR FACTORY AND OFFICE
Our exhibition
Worldwide market and exhibition:
Our Jiangsu Jiacheng is one of the top 10 manufacturers of producing wire and cable machinery in China. Our products have exported to India,Iran,Pakistan,Vietnam,Malaysia,Kenya,Syria,Brazil,Egypt,Bangladeshand so on. We take part in the international wire and cable machinery exhibition every two year, we also participate the exhibition in the foreign countries.