2 hours Dry Super Crystal Clear Epoxy Glue for DIY Crafts Making

Epoxy Resin 1011AB
Feature
Epoxy resin 1011AB can be cured under normal temperature and high temperature with long operation time and fast curing. With the feature of very low viscosity, good flowing property and can be natural defoamed, super yellow resistance, high transparency, no ripple, bright in surface, it is a ultra clear crystal epoxy with wide range of applications.
Application
1011AB can be widely used for all kinds of crafts making, such as necklace pendent bracelet, earrings, and can be applied to the coating of signs, cards, signage, nameplate,lamp potting and mold filling, etc..
Properties before Hardening
Part
1011A
1011B
Color
Transparent
Transparent
Specific gravity
1.12
1.06
Viscosity (25℃)
240 CPS
100 MAXCPS
Mixing ratio
A: B = 100:33(weight ratio)
Hardening conditions
25 ℃x4H to 5H or 70℃x1H (2 g)
Usable time
25℃x60min (100g)
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Properties after Hardening
Hardness, shore D
<87
Withstand voltage, KV/mm
22
Flexural strength, Kg/mm2
28
Volume resistivity, Ohm3
1x1015
Surface resistance, Ohmm2
5X1015
Thermal conductivity, W/M.K
1.36
Induced electric loss, 1KHZ
0.42
Withstand high temperature, ℃
90
Moisture absorption, %
<0.15
Compressive strength, Kg/ mm2
8.4

Caution
1,The operating environment should be ventilate and should keep away from fire. Closely sealed after use.

2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.

Storage And Shelf Life
1, Store at the tempestuous of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C. .
Packing and Shipping
5kgs per bottle, 20kgs per carton
20kgs per barrel
200kgs per barrel
Our Service
FREE SAMPLE IS AVAILABLE!!!Jinhua professional produce and market all kinds of epoxy resin AB glue which covers a very large range of applications: Soft AB glue for stickers, LED strip potting, badge, nameplate, nail cutters, keychain!!!Hard clear resin for LED channel letters, photo frame coating, hand made diamond, jewelry, crafts, nacklace, bangles, bracklets, earrings, rings, miniatures such as simulated water, soup,lquid drinks and fishbows to be used in a child's dollhouse, anything you can image clear and shinning, but cheap and easy to operate!!!Coating resin for surfboard, paddle, christmas ball, globe, foam products coating, bicycles, boats, golf clubs,skies, snowboards, swimming pool, garage, wood table coating, Epoxy flooring, to make it hard and durable!!!Special ahhesion for wood, metal, glass, stone and some plastic.With very strong and high durable bond after cured!!!Flexible potting resin for electronic products such as motors, generators, transformers, swithgeear, insulators, mold filling,LEDs, perfectly to protect the potting items from short circuit, dust, water, and moisture, and giving the potting items a more stable and longer life than unpotted products!!!Pls contact us to discuss your application for a best EPOXY SOLUTION!!!
All of our products has ROHS, REACH, PAHS, ASTM, EN-71 CERTIFICATE!!!
Company Information: