Natural Defoaming Epoxy Resin for 3D Floor


Product Description
Epoxy resin 113AB can be cured under normal temperature, with the feature of low viscosity and good flowing property, natural defoaming, antiyellow, high transpareny , no ripple, bright in surface..It is an eco-friendly material without odour , easy to clean and operate .water and dust proof . Special sructure and high density of the 3D floor tiles standard size surface, make it more astringent when come acorss water.
Certificate
Application fields: Healthcare, Hotels, Education, Leisure, Multi-purpose Gym, Office, Retail, industry, Public area, Residential, Retirement homes, Sport club, Sport events,Sport shop, Fitness…
It is widely used in: photo frame coating, crystal flooring coating, hand made jewelry, and mold filling, etc...
Product Gallery

Features
Properties before Hardening
Part
312A-6-X
312B-6-X
Color
Transparent
Transparent
Specific gravity
1.15
0.97
Viscosity (25℃)
2000-4000CPS
100 MAXCPS
Mixing ratio
A: B = 100:33(weight ratio)
Hardening conditions
25 ℃x8H to 10H or 55℃x1.5H (2 g)
Usable time
25℃x40min (100g)
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Properties after Hardening
Hardness, shore D
<86
Withstand voltage, KV/mm
22
Flexural strength, Kg/mm2
28
Volume resistivity, Ohm3
1x1015
Surface resistance, Ohmm2
5X1015
Thermal conductivity, W/M.K
1.36
Induced electric loss, 1KHZ
0.42
Withstand high temperature, ℃
80
Moisture absorption, %
<0.15
Compressive strength, Kg/ mm2
8.4
Packaging & Shipping
5kgs per bottle; 20kgs per carton
20kgs per barrel
200kgs per barrel
Company Information