Brushless DC Motor Driver BLDC-5015A, BLDC DRIVER, 86mm brushless driver, 57mm dc brushless driver, leadshine dc brushless driver2.Smooth torque output within speed range (8000 rpm Max.)3.Speed regulation:potentiometer adjust / Analog input4.Run/Step,Quick Brake,CW/CCW rotation shift5.Speed output,Alarm output(O.C.)6.Over current,over voltage,stall,missing speed Alarm24~50VDC, Capacity:up to motors
Current output
Rated 15A,Peak 45A(≤3s)
Driving mode
SPWM
Insulation Res.
>500MΩ
Dielectric Strength
500V/Minute
Weight
about 300gSelf cool
Environment
Keep away from oil, dust, and acid gas
Temperature
0ºC~+50ºC
Humidity
<80%RH
Vibration
5.7m/s2.Max.
Storage temp.
-20ºC~+125ºC Command to
Speed adjust
Comman
Current
ON
RV
CW—speed up,CCW—speed down
-
-
OFF
AVI
0~5V analog input
0~5V volage
≤5mA
OFF
AVI
PWM
1KHz duty cycle
-ON
120°or 240°hall signal,they are in opposite rotation direction
OFF
60°or 300°hall signal, they are in opposite rotation directionDescription
DC+;DC-
Voltage supply to driver
U;V;W
To motor leads. Make sure correct connection to motor leads.
REF+;REF-;HU;HV;HW
Hall sensor connection,REF+;REF- are for hall power supply. Make sure correct connection to halls.
AVI;ENBL;F/R;BRK;Vcc
Controls input,see below picture
SPEED;ALM
Signal output,(O.C.)