BADA series SHBD630 Hydraulic hdpe pipe butt fusion welding machine for plastic pipe from 400mm to 6

Product Description
630 pe hdpe welding machine---Application:
PE pipes fusion welding machine;
HDPE pipes fusion welding machine;
PP pipes fusion welding machine;
PB pipes fusion welding machine;
any other plastic pipes available for fusion welding... ...
630 pe hdpe welding machine---Furtherparameters:
Model
SHBD630
Welding diameters (mm)
400,450,500,560,630
Heating plate temperature
270°C
Heating plate surface
temperature(170-250°C)
<±5°C
Pressure adjustment range
0-6.3MPa
Cross-sectional area of the cylinder
2306mm2
Working Voltage
380V,50Hz
Heating plate power
9.2KW
Milling cutter power
1.5KW
Hydraulic station power
1.5KW
Total Power
12.2KW
630 pe hdpe welding machine--- Our advantages:
1. The raw material of the machine frame is aluminum ZL104, it is light but strong, is one of the best material for machine.

2. The main electrical apparatus elements are best of china, imported from abroads.

3. Removable PTFE coated heater with separate temperature control system,temperature can be controlled to a minimum range.

4. The electric facer adopts reversible double cutting edge blades, which can make the cutting effect more perfect.The milling cutterThe heating plateThe machine frameThe hydraulic station
The main electrical components are imported from overseas, which are more reliable and stable, extend the life of welding machine and perform more efficiently.


630 pe hdpe welding machine--- Assistant tool:
The od card which matches the pipes must be used. Stuck the pipe tightly then fix them on the rack.
Open the ends of pipes,put in the milling cutter, and fix the milling cutter on the rack. Start the milling cutter, mover forward the cylinder,close the fixture and cut the ends.
when it forms into thecontinuous chips, lower the pressure to zero firstly, then open the fixture and close the milling cutter at last.Put down the milling cutter, close the ends, and check up the pipe of the two ends.
Check up the temperature of the heating plate. For the first welding, the temperature of the heating plate should be heated over the pre-heated temperature . Every time for welding, the heating plate must be cleaned.
Put the heating plate with the suitable temperature on the rack, close the fixture, make the end meets the end meets the heating plate fully and set the system pressure.
When the end raises uniformly and the height of the crimps meet the requirements, the heating time should be lowered at the same time.
When it get to the endothermic time, open the fixture quickly and remove the heating plate.
Close the fixture quickly, adjust the pressure uniformly in the specified time and write down the cooling time.The pressure should be kept until the ends cool down completely.
When it gets to the cooling time, adjust the pressure to zero, open the fixture, and remove the welded pipe.Packaging & Shipping
Our machine will be spread a layer of oil, and then be wraped by plastic film, put into a wooden box at last. This type of packages is avoid getting rusty easily.Our Services
1. One year warranty, life-long maintenance.

2. In warranty time, if nonartificial reason damaged can take old change new for free. Out of warranty time, we can offer maintenance service (charge for material cost).

3. Engineers available to service machinery overseas but all the costs to the buyer to pay.Company InformationJINANBADAPLASTICPIPEWEDLINGEQUIPMENTCO.,LTDisaleadermanufacturerspecializedinbuttweldingmachineinchina.Ithasbuiltupanexcellentbrandimageandgottenabove80%domesticmarketandexporttomorethan40countriessinceenteredtoChinain2009.Weownacompleterangeofinternationalstandardbuttfusionequipmentincludingfieldweldingmachine,workshopfittingmachine,pipecuttingsaw,alltheoptionalpartsandtoolsrequiredundertheISO9001qualitysystemaswellasCEcertification.
Look forward to the cooperation with you ~~~