double belt pu making machine

JXLC3+3 discontinuous PU sandwich panel line has two parts:
One part is press machine which has up and down two pressure maintaining work areas. Three mould templates are placed in each workspace. When the upper work area is pressurized, the lower working area is opened, and the mould templates can be placed or taken out by the manipulator in open work area. The upper and lower work areas are alternately used.
The other part is automatic lifting platform which it’s workflow
- Remove the finished mould template from the open work area,
-Then drop to the height of the work;
-The insulation board will be taken out by manipulator or manual work, process paving work and feeding the mould template into the pressure machine;
- Take out the next template until the three panels are finished.
2.Main technical parameters and description of equipment
2.1 Model: JXLC-3+3-12500*1450
2.2 Max processing dimension:12000mm*1200mm.(3~14m is optional)
2.3 Number of Pallets:6 pieces
2.4 Processing thickness;50~200mm
2.5 Working pressure:16MP
2.6 Clamping force of mold: 300T
2.7 Hydro-cylinder:125mm*16 units
2.8 Clamping speed:1m/minute
2.9 Hydraulic power:15KW
2.10 Lifting of platform lifting:Hydraulic lifting or wire rod lifting can be selected according to the user's site and the situation with auxiliary equipment
2.11Lifting speed:1.5m/minute
2.12 Template translation:The template translation is controlled by the stepping motor with a speed of 12m / min.
2.13 Synchronization system: The traveling speed of the platform is consistent during the control of the synchronous system.