Sludge dewatering Copper containing wastewater treatment

Product Description
When the device is operated, the conditioned sludge flows into the flocculation tank and is pushed forwad the discharging end. With the gap between the thread of the shaft is getting more and more narrow, the pressure on the sludge is getting higher and higher.Then the water is separated from the sludge and flow out from the gap between the moving and fixed plate. The movement of the moving plates and the fixed plates cleans the gap between them and prevent the machine from blockage. The filtered sludge cakes are pushed forward by the shaft and finally discharged from the end.
Fine workmanship, beautiful products, full body stainless steel,
frosting process, attention to detail, industrial grade artwork.
The screw type sludge dewatering machine configurates exclusive spiral plate for pre-concentration and better for dealing with low concentration sludge.To improve the shortcomings of gravity type in order to realize efficient concentration of sludge.Floucculation and concentration operating together, make dewatering easy.Optimize concentration of original sludge for dewatering with intelligent control valve.
The screw type sludge dewatering machine depends on the volume pressure dehydration, dispensing with drums and other large-sized devices so as to realize a low operation speed, which is only 2-4 revolutions per minute.Therefore, the machine is able to realize low energy consumption, low water consumption and less noise. The average energy consumption is only 1/8 of the belt type machine, the 1/20 of the centrifuge, with the unit energy consumption is only 0.01-0.1 kwh/kg-DS, being able to reduce the system operation cost of sewage treatment.